Yamaha Clavinova CVP-809 Owner's Manual page 96

Master
3
Touch a tab for editing the desired parameters.
 When a tab other than "Master" is selected in step 2:
Filter
EQ
Effect
Chorus/Reverb
Pan/Volume
 When "Master" is selected in step 2:
Compressor
EQ
4
Set the value of each parameter.
NOTE
To reset each parameter to the default value, touch the number value or setting and hold it.
5
Save your Mixer settings.
 To save the "Panel" Mixer settings:
Register them to Registration Memory (page 87).
 To save the "Style" Mixer settings:
Save them as a Style file to the User memory or USB flash drive. If you want to recall the settings
for future use, select the Style file saved here.
1.
Call up the operation display via [Menu] → [StyleCreator].
2.
Touch
 To save the "Song Ch 1-8/9-16" Mixer settings:
First register the edited settings as part of the Song data (Setup), then save the Song to the User
memory or USB flash drive. If you want to recall the settings for future use, select the Song file
saved here.
1.
Call up the operation display via [Menu] → [SongCreator] → [Channel Edit].
2.
Touch [Setup].
3.
Touch [Execute] to execute the Setup.
4.
Touch
 To save the "Audio" Mixer settings:
Saving operation is not necessary. Audio Mixer settings are retained even when the power is
turned off.
96
CVP-809/CVP-805 Owner's Manual
Unlike the other displays, use this display when you want to adjust the tonal
characteristics of the entire sound (except for Audio Songs) of this instrument.
For adjusting the Harmonic Content (resonance) and sound brightness.
For adjusting equalization parameters to correct the tone or timbre of the
sound.
For selecting an Effect type and adjusting its depth for each part.
For selecting a Chorus/Reverb type and adjusts its depth for each part.
For adjusting panning and volume for each part.
Lets you turn the Master Compressor (which is applied to the entire sound)
on or off, select the Master Compressor type, and edit the related parameters.
Your original edits can be saved as the Master Compressor type.
Lets you select the Master EQ type applied to the entire sound and edit the
related parameters. Your original edits can be saved as the Master EQ type.
(Save) to call up the Style Selection display, then save as a Style file (page 32).
(Save) to call up the Song Selection display, then save as a Song file (page 32).