Table of Contents
Advertisement
To store the "Master" Mixer settings:
Your original edits can be stored as a Master Compressor type and Master EQ type. If you want
to recall the settings for future use, select the corresponding type at the upper right of each
display.
1.
Touch
2.
Select one of User1 – User30 in the "Compressor" display or User1 – User30 in the
"EQ" display, then touch [Save] to call up the Character Entry window.
3.
On the Character Entry window, change the name as necessary, then touch [OK] to
save the data.
Turning Each Channel of the Style or MIDI Song On/Off
The Mixer display lets you turn each channel of the current Style or MIDI Song on or off.
1
In the Mixer display, touch the [Style] tab, [Song Ch 1-8] tab or [Song Ch 9-16] tab.
2
Touch the Channel which you want to turn on or off.
If you want to solo a specific channel, touch and hold the desired channel until the number
turns green. To cancel solo, simply touch the (green) channel number again.
To change the Voice for each channel:
Touch the instrument icon below the channel number to call up the Voice Selection display, then select
the desired Voice.
3
As necessary, make other settings then save them as a Style file or Song file (step 5
on page 96).
(Save) in the "Compressor" display or "EQ" display.
Channel
Voice
CVP-809/CVP-805 Owner's Manual
9
97
Advertisement
Table of Contents
