Web Image Monitor; Displaying Top Page - Ricoh P 502 User Manual

3. Web Image Monitor

This chapter describes frequently used Web Image Monitor functions and operations. For information
not included in this chapter, see Connecting the Machine/ System Settings available on our website or
Web Image Monitor Help.

Displaying Top Page

This section explains the Top Page and how to display Web Image Monitor controlled from networked
computers. (Web Image Monitor is a management tool installed on this machine to monitor this machine
or configure settings for this machine by using a web browser.)
If user authentication is activated, you are required to enter your login user name and password to use
Web Image Monitor. For Details, "Logging In/Out Using Web Image Monitor", For First-time Users.
• When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
"192.168.001.010", you must enter it as "192.168.1.10".
1. Start a web browser from a networked computer.
2. Enter "http://(machine's IP address or host name)/" in your web browser's URL bar.
Top Page of Web Image Monitor appears.
If the machine's host name has been registered on the DNS or WINS server, you can enter it.
When setting SSL, a protocol for encrypted communication, under environment which server
authentication is issued, enter "https://(machine's IP address or host name)/".
Web Image Monitor is divided into the following areas:
1
1. Menu area
If you select a menu item, its content will be shown.
2
3
4
5
DYR407
71