1. Getting Started
Connecting in Ad hoc Mode
In Ad hoc mode, you can specify an SSID to the machine, and connect your computer directly to the
machine via a wireless LAN.
• The Wireless LAN interface board must be installed to use Ad hoc mode.
1.
Press the [Menu] key.
2.
Press the [ ] or [ ] key to select [Host Interface], and then press the [OK] key.
3.
Press the [ ] or [ ] key to select [Network], and then press the [OK] key.
4.
Press the [ ] or [ ] key to select [LAN Type], and then press the [OK] key.
5.
Press the [ ] or [ ] key to select [Wireless LAN], and then press the [OK] key.
6.
Press the [Escape] key.
7.
Press the [ ] or [ ] key to select [Wireless LAN], and then press the [OK] key.
8.
Press the [ ] or [ ] key to select [Communication Mode], and then press the [OK] key.
9.
Press the [ ] or [ ] key to select [802.11 Ad-hoc Mode], and then press the [OK] key.
10.
Press the [ ] or [ ] key to select [SSID Setting], and then press the [OK] key.
11.
Press the selection key beneath [Enter SSID].
12.
Press the selection key beneath [Enter].
13.
Press the [ ], [ ], [ ] or [ ] key to select a character, and then press the [OK] key to
enter the SSID.
14.
Press the selection key beneath [Accept] when you finish entering the SSID.
15.
Press the [ ] or [ ] key to select [Ad-hoc Channel], and then press the [OK] key.
16.
Press the [ ], [ ], [ ] or [ ] key to select a channel, and then press the [OK] key.
17.
Press the [ ] or [ ] key to select [Security Method], and then press the [OK] key.
18.
Press the [ ] or [ ] key to select [WEP], and then press the selection key beneath
[Details].
To not use security setting, select [No].
19.
Press the selection key beneath [Enter].
20.
Press the [ ], [ ], [ ] or [ ] key to select a character, and then press the [OK] key to
enter the WEP key.
21.
Press the selection key beneath [Accept].
16