Winix ZERO AZBU330-HWE User Manual page 16

FILTER CARE
6. Cleaning the filter
Intervals between filter cleaning may vary depending on the air quality.
Use a vacuum cleaner or soft brush to
①
clean the Pre-filter. If it is excessively
soiled, rinse in room temperature water.
ˍ Do not use detergent or soap.
ˍ Allow the filter to dry for 24 hours or
more before using
※ If the pre-filter becomes damaged
or in any way needs replacement:
Please contact your local
dealer
ˍ Do not use benzene, alcohol, or other volatile fluids, which
NOTICE
ˍ The Pre-filter is reusable after cleaning, ensuring it is
ˍ Do not use hot water over 40
ˍ After washing the filter, allow it to dry completely in a well
English
may cause damage or discoloration.
completely dry.
paint thinner.
ventilated area. Otherwise, it may develop a bad odour.
o
C or volatile fluids such as
ZERO
16