Table of Contents
Advertisement
L
(3)
Coding
The following instructions
form
the
program for
this fixed size
cutting
example.
Note: Since the
FX-
1
GM employs a sequential instruction-by-instruction operation, the
ON/OFF
condition will not be read unless the instruction concerned is being executed.
In this regard, the FX-
1
GM uses such a cycle method to wait for the input.
Momentary operations such as pushbuttons, etc. will not be accepted if the pulse is less than
10
msec (except for INT and VCH instructions).
- 7 0 -
Advertisement
Table of Contents
