Mitsubishi MELSEC-F FX-1GM Handy Manual page 60

Reading from the PGU
Execute the reading of programs and parameters from the FX-EEPROM-4 ROM cassette built in the
PGU to the TP. (In this case, data in the TP is destroyed.)
T P - G M
I F
O K - G O
In the case of transmis-
sion failure, repeat the
operation after eliminating
the reason for the trouble.
L
Normal reading
T P - G M
E X E C U T I N G
c
I
T P - G M
F I N I S H E D
Connection failure of the transmission
connector T P + G M
T R A N S F E R T R O U B L E
PGU/TP verifying
Execute verifying/comparing of programs and parameters in the PGU and the TP
If there is any inconsistency, the relevant step number
is
displayed,
In the case of transmission
failure or verify error, repeat
the operation atter eliminating
the reason for the trouble.
T P G M
F I N I S H E D
Up to max. 15 step numbers can be
displayed. (Note)
Verify error
E R R O R
x x x x
x x x x
x x x x x x x x x x x x
Connection failure of transmission
connector
T P : G M
T R A N S F E R T R O U B L E
Note: Inconsistent step numbers of parameters and programs are given as follows:
2 0
(In the case of parameter number
14,
for instance, 2014 is displayed.)
1
Inconsistent parameter number
- 5 a -