Argox AR-3201 User Manual page 27

2. On your iPhone, Go to
Settings > Bluetooth. Turn on
Bluetooth, and your iPhone
searches other Bluetooth
devices automatically. If it
detects your scanner, it shows
"AR3201:XXXXXXXXX" (X
is your scanner's serial
number) under DEVICES.
Tap your scanner to connect it.
3. When it connects successfully,
the status of your scanner is
changed to Connected.
4. Tap Notes to open a new note.
Use your scanner to scan bar
codes and the data shows in
the note.
Note: Apple iOS devices will allow only one input device working
at the same time. So when you connect an Argox Cordless
Scanner with your Apple device, the Apple Virtual Keyboard will
be invalid automatically. To have the Apple Virtual Keyboard be
available again, you need to scan the barcode below.
19