Argox AR-3201 User Manual page 85

8. Repeat the previous step until you set all
the rules you need, and click the String
tab.
9. In the String tab, there are 10 string
boxes: Insert G1-G10 chars setting.
Each box corresponds to the group
you've selected in the string list in the
Data Magic tab. Depending on your
selection, type the text you want in the
specific box. For example, if you've
selected Group1, type in the Insert G1
chars setting box. The string box accepts
up to 12 single-byte characters. When
you're done, click OK.
10. On the Tool menu, click Export Config
(from Host), and click Export. If the
data is exported successfully, you'll hear
a long beep.
In the Data Magic tab, you'll find 10 rules.
Each rule can be set to one of the commands.
The table below describes how to use those
commands.
77