Battery; Charge The Battery; Replacing The Battery - Argox AR-3201 User Manual

2.2 Battery

AR-3201 contains a lithium-ion battery that is
partially charged at the factory. You might
want to charge it to full before your use it. The
battery life varies depending on usage.

2.2.1 Charge the battery

You can charge the battery by connecting the
USB cable to your computer, or by using a
power supply (optional), which charges the
battery faster. When your scanner is fully
charged, your cradle's LED turns to green.
Charging by
Power Supply
USB Cable
Caution Keep the charging pins dry
when you put your scanner on your cradle
to charge the battery. Wet charging pins
may cause water seeping into your cradle
and shortening its life.

2.2.2 Replacing the battery

The battery's life is consumed as you use and
charge it. You need to replace the battery
when it wears out. Please follow the steps
below to replace the battery.
1. Remove the rubber band around the scan
window of the scanner.
2. Remove the two fixing
screws on the lower
cover of the scanner by
using a Phillips
screwdriver.
Full Charge Time
4.5 hours
6.5 hours
9