Table of Contents
Advertisement
Receiving, Inspection & Storage
Please Read These Warnings Carefully Before Unpacking the Mixer
WARNING!
Goods must be inspected with 30 days of receive date. It is assumed that goods are satisfactory if Dynamix is
not notified within this period.
Your mixer has been tested and checked for shaft straightness before shipping. Care must be taken while
handling the shaft to ensure proper operation.
Please follow the following steps to prevent injury or damage to equipment:
1. Check all crating and boxes for damage, which may have occurred during transit.
2. Report any damage immediately to the carrier and to Dynamix Agitators Inc.
3. Check all parts against packing list to verify that all parts have been received. Report any missing parts to
Dynamix Agitators Inc.
4. The Dynamix Factory has tested and checked this mixer for operation and shaft straightness before shipping.
Care must be taken when handling this mixer to ensure proper operation and longevity.
5. Store the mixer in a clean, dry environment, with a relatively constant temperature. Electric motors are easily
damaged by moisture. Circulating air will help prevent moisture buildup in the mixer.
6. Store the mixer assembly off the floor, covered by plastic.
7. Do not seal the plastic covering, as this will increase the chance of condensation. Use desiccants if possible.
WARNING!
R16 122016
The following safety instructions must be COMPLETELY REVIEWED
AND FOLLOWED before operating any Dynamix Mixer. FAILURE TO
FOLLOW THESE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY
Always shut of the mixer power source (Unplug electric power and
disconnect air power source) before performing any maintenance,
repair or adjustments. Not doing so can result in serious injury.
MOVING PARTS HAZARD
3
Hide quick links:
Advertisement
Table of Contents
