Table of Contents
Advertisement
8.
Replace the EBM front cover.
To replace the cover, verify that the EBM cables are routed through
the EBM cover knockouts, then slide the cover from the left to the
right until it connects with the cover hook near the left side of the
EBM cabinet. Reinstall the two screws on the right side of the front
cover. See Figure 8 on page 23.
Repeat for each additional EBM.
9.
Verify that all wiring connecting the UPS and EBM(s) is installed
behind the front covers and is inaccessible to users.
10. Ensure maximum battery runtime by configuring the UPS for the
correct number of EBMs (see page 27).
11. Charge the EBM(s) for the times recommended in Table 4 on
page 40.
Avaya 9130 EBM Site Preparation, Installation and Operator's Manual
INSTALLATION
S
25
164201770 Rev 1
Advertisement
Table of Contents
