Table of Contents
Advertisement
Installation
The Avaya 9130 rackmount cabinet comes with all hardware required for
installation in a standard EIA or JIS seismic rackmount configuration with
square and round mounting holes. The rail assemblies adjust to mount in
48-cm (19-inch) racks with front to rear rail distances from 61 to 76 cm
(24 to 30 inches) deep.
Checking the Rail Kit Accessories
Verify that the following rail kit items are included for each cabinet:
S
S
S
S
Tools Required
To assemble the components, the following tools may be needed:
S
S
S
Avaya 9130 EBM Site Preparation, Installation and Operator's Manual
Left rail assembly:
- Left rail
- Rear rail
×
- (3) M4
8 pan-head screws
Right rail assembly:
- Right rail
- Rear rail
×
- (3) M4
8 pan-head screws
Rail hardware kit:
×
- (10) M6
16 pan-head screws
- (10) M6 cage nuts
- (2) rear stop brackets
×
- (2) M3
8 pan-head screws
Mounting bracket kit:
- (2) mounting brackets
×
- (8) M4
8 flat-head screws
Medium flat-bladed screwdriver
Phillips
#2 screwdriver
®
7 and 8 mm wrench or socket
INSTALLATION
S
17
164201770 Rev 1
Advertisement
Table of Contents
