Table of Contents
Advertisement
INSTALLATION
2.
NOTE Use care to protect the LCD control panel and the connected ribbon cable from
damage.
3.
22
Avaya 9130 EBM Site Preparation, Installation and Operator's Manual
Figure 6. Removing the UPS Right Front Cover
On the bottom of the UPS right front cover, remove the EBM cable
knockout (see Figure 7).
esc
Knockout for EBM Cable
Figure 7. Removing the EBM Cable Knockout
Remove the front cover of each EBM (see Figure 8).
To remove the cover, remove and retain the two screws on the
right side of the cover. Grasp the sides of the cover and slide the
cover to the left and then away from the cabinet.
NOTE Leave
ribbon cable
connected.
S
164201770 Rev 1
Advertisement
Table of Contents
