Introduction; Touch Pad Diagram - Lippert Components Level-Up Owner's Manual

Lippert Components Inc. recommends that a trained professional be employed to change the tires on the
unit. Ensure that the unit is properly supported with jack stands, or other adequate devices, under the
frame of the unit prior to commencing any service or repair procedure. Any attempts to change the tires or
perform other service while unit is supported solely by the LCI Level-Up® with Automatic Leveling System

Introduction

Level-Up® is an Automatic Leveling system. This system is equipped with 14K aluminum landing gear and 8K
aluminum leveling jacks. The jacks in the Level-Up® system work in pairs.

Touch Pad Diagram

A
B
C
D
Callout
A
B
C
D
E
F
G
H
I
J
K
Rev: 04.05.2018
could result in death, serious injury, unit or property damage.
E
F
Description
Up Arrow - Scrolls up through the menu on LCD.
Down Arrow - Scrolls down through the menu on LCD.
Enter - Activates modes and procedures indicated on LCD.
Retract - Places leveling system into retract mode - Manual mode ONLY.
LCD Display - Displays procedures and results.
Auto Level - Places leveling system into auto level mode.
Front Button - Activates both front jacks.
Left Button - Activates left leveling jack(s) in manual mode.
Right Button - Activates right leveling jack(s) in manual mode.
Rear Button - Activates leveling jacks in manual mode.
Power Button - Turns leveling system on and off.
Fig. 1
K
G
H
Page 3
I
J
Level-Up Towable Owner's Manual