Table of Contents Read Before Use ......................1 Safety Precautions........................1 Structure ............................2 Basic Function ......................3 User Introduction ........................3 Initialization ..........................4 Random Password ........................4 Voice Guide ..........................5 Volume Setting .......................... 5 Language Setting* ........................5 Link to the Interweb* ......................
Page 3
Lockout mode ..........................6 9V External Battery ........................7 Emergency Mechanical Key ....................8 How to Use ........................9 Register First Administrator ....................9 Register another Administrator ..................11 Register User ..........................12 Delete Administrator ......................13 Delete User ..........................14 Enroll Additional Credential ....................
Read Before Use Safety Precautions Factory settings of all new locks allow any verification to unlock them. One administrator must be registered on newly installed locks. Ordinary users cannot be registered until an administrator is registered. The lock is equipped with a mechanical key. Store the mechanical key in a safe place. Four alkaline AA batteries (not included) are required to power on the lock, Non-alkaline and rechargeable batteries ARE NOT RECOMMENDED.
Basic Function User Introduction Group Verification Mode Function Capacity Card Max.100 Register / Delete User, Administrator Password Open The Door, Max.100 Access the menu Fingerprint Max.100 Card Max.100 User Password Open the door Max.100 Fingerprint Max.100 Note: The lock's maximum card/password user capacity is 100. Use a password of six digits.
Initialization Initializing the lock means all data will be deleted and restored to factory default settings. Operation steps: Press and hold the reset button on the body of the lock then remove the battery and put it back again, wait for 3 seconds, the lock will prompt “Restore to default settings, wait a moment.
Voice Guide The lock provides voice prompts when operating the menu for easy configuration. Volume Setting The lock volume can be set, which has three modes, high volume mode, low volume mode and silent mode. Language Setting* It supports English, Spanish and Portuguese. Every single lock will standard with one language, if you want the language combination, please contact to our sales team.
Add Remote Key* The door can be unlocked by remote control. This is an optional function. Please refer to page 18. Always Open Mode Always Open mode is to keep door always unlocked, allowing people to pass in and out freely.
9V External Battery 9V external battery is used to keep the lock operative when its battery is fully discharged. Note: The above battery must be 9V alkaline battery (6LR61). P a g e...
How to Use Register First Administrator Operating Steps Touch the keypad to wake up the lock Press 0 and # to access the menu Enter three-digit user number Enter fingerprint, card or password Press # to continue Press * to complete registering another user P a g e...
Page 13
Note: Verify cards by swiping them over the detection area. Password length must be six digits. Default user number length is three digits, but one or two digit user numbers are accepted by pressing the # key. Press * to cancel registration before the registration is complete. P a g e | 10...
Register another Administrator Operating Steps Touch the keypad to wake up the lock Press 0 and # to access the menu Verify administrator using fingerprint, card or password Press 1 to register admin, and press # to continue Enter three-digit user number Enter fingerprint, card or password Enter # to continue Enter * to complete...
Register User Operating Steps Touch the keypad to wake up the lock Press 0 and # to access the menu Verify administrator using fingerprint, card or password Press 2 to register user, and press # to continue Enter fingerprint, card or password Enter # to continue Enter * to complete registering another user...
Delete Administrator Operating Steps Touch the keypad to wake up the lock Press 0 and # to access the menu Verify administrator using fingerprint, card or password Press 3 to delete admin, and press # to continue Enter three-digit user number Enter # to continue deleting Enter * to complete another administrator...
Delete User Operating Steps Touch the keypad to wake up the lock Press 0 and # to access the menu Verify administrator using fingerprint, card or password Press 4 to delete user, and press # to continue Enter three-digit user number Enter # to continue deleting Enter * to complete another user...
Enroll Additional Credential Operating Steps Touch the keypad to wake up the lock Press 0 and # to access the menu Verify administrator using fingerprint, card or password Press 5 to enroll additional, and press # to continue Enter three-digit user number Enter fingerprint, card or password Enter # to continue enrolling Enter * to complete...
Volume Setting Operating Steps Touch the keypad to wake up the lock Press 0 and # to access the menu Verify administrator using fingerprint, card or password Press 6 to set volume, and press # to continue 1. High volume 2. Low volume 3. Silent mode Enter # to confirm Note: If you verify administrator by password, then press # after entering the password.
Setting Operating Steps Touch the keypad to wake up the lock Press 0 and # to access the menu Verify administrator using fingerprint, card or password Press 7 and # to enter the secondary menu *Press 2 and # to link to *Press 3 and # to set up Press 1 and # to set Auto interweb, please refer to the...
Always Open Mode Operating Steps Touch the keypad to wake up the lock Press 0 and # to access the menu Verify administrator using fingerprint, card or password Press 8 to set Always open mode, and press # to continue 1.
Add Remote Key* Operating Steps Press 0 and # to access the menu Verify administrator using fingerprint, card or password Press 9 and # to confirm Press 3 and # to delete Press 1 and # to add remote Press 2 and # to delete one all remote keys remote key Press unlock button on the...
Page 23
FCC Note This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 24
equipment Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The device has been evaluated to meet FCC general RF exposure requirement. The device can be used in portable exposure condition without restriction. P a g e | 21...
Page 25
Manufacturer: ZKTECO CO., LTD. Address: No.26, Pingshan 188 Industry zone, Tangxia Town, Dongguan City, Guangdong Province, China Hereby, ZKTECO CO., LTD. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU Importers: ZKTECO EUROPE SL Address:Carretera de Fuencarral, 44 Edificio 1, Planta 2, 28108 Alcobendas , Madrid- Spain A copy of the declaration of conformity can be obtained with this user manual;...