ZKTeco AL10B User Manual
Digital lock with voice
Hide thumbs
Also See for AL10B:
- Installation instruction (12 pages) ,
- User manual (22 pages) ,
- User manual (24 pages)
Related Manuals for ZKTeco AL10B
Summary of Contents for ZKTeco AL10B
- Page 1 USER MANUAL AL10B digital lock with voice guide Version: 1.0 Date: December, 2017...
-
Page 2: Table Of Contents
Table of Contents Read Before Use ......................1 Safety Precautions ........................1 Structure ............................. 2 Basic Function ....................... 3 User Introduction ......................... 3 Initialization ............................4 Random Password ........................4 Voice Guide ............................5 Volume setting ..........................5 Language setting ......................... 5 Lockout mode .......................... - Page 3 How to change handle direction ..................8 Emergency Mechanical Key ....................9 How to Use ........................10 Register First Administrator ....................10 Register Other Administrator .................... 12 Register Normal User ......................13 Delete Admin ..........................14 Delete Normal User ......................... 15 Back up enroll ..........................
-
Page 4: Read Before Use
Read Before Use Safety Precautions The factory setting of all new locks will allow ANY verification to open them. Please register at least one administrator for the newly installed lock. The lock cannot register any normal users without an administrator. The lock is equipped with mechanical keys for manual unlocking. -
Page 5: Structure
Structure 5. Battery Area 1. Card Area 2. Keypad & Card Detection Area 6. Louckout Switch 7. 9V Battery Interface 3. Mechanical Key Hole 8. Speaker 4. Handle P a g e... -
Page 6: Basic Function
Basic Function User Introduction Group Verification Mode Function Capacity Register / Delete User, Card Max.100 Administrator Open The Door, Password Max.100 Access in menu Card Max.100 Normal User Open the door Password Max.100 Note: The maximum card/password capacity is 100 for all groups. The length of password is six digits. -
Page 7: Initialization
Initialization Initializing the lock means all data will be delete and restore to factory default setting. Operation steps: Press the reset button on the back body of the lock, then touch the keypad to power on the lock holding the reset button for 5 seconds until the lock prompts the voice of “Restore to default settings, wait a moment”. -
Page 8: Voice Guide
Voice Guide After accessing the menu, the lock provides voice prompts before and after each operation for easy configuration. Volume Setting The lock volume can be set, which has three modes, high volume mode, low volume mode and silent mode. Language Setting Supports English / Spanish.or English / Portuguese. -
Page 9: Normal Open
Normal Open Normal open mode is to keep door always unlocked, which is fit for meeting room and some places free to in or out. Low Battery Warning When the lock has a low battery a short beep and voice prompt of "Battery is low, please replace"... -
Page 10: 9V External Battery
9V External Battery 9V external battery is used to open doors in emergency. Note: The above battery must be 9V alkaline battery (6LR61). P a g e... -
Page 11: How To Change Handle Direction
How To Change Handle Direction Step: Remove the screws with a screwdriver. Take out the lock handle. Turn the handle in the opposite direction. Replace the screws. P a g e... -
Page 12: Emergency Mechanical Key
Emergency Mechanical Key The mechanical key is used to open door when the lock has electronic malfunction. Note: Keep the mechanical key at a safe place. P a g e... -
Page 13: How To Use
How to Use Register First Administrator Operating Steps Touch the keypad to power ON the lock Press 0 and # to access into menu Enter 3 digit user number Enter password or swipe card Press # to continue Press * to complete registering another user P a g e | 10... - Page 14 Note: Put the card on the card area. The length of password should be of six digits. Default user number length is three digits, but one or two digit user numbers are accepted by pressing the # key. Press * to cancel registration before the registration is complete. P a g e | 11...
-
Page 15: Register Other Administrator
Register Other Administrator Operating Steps Touch the keypad to power ON the lock Press 0 and # to access into menu Verify administrator by card or password Press 1 to register user, and press # to continue Enter 3 digit user number Enter password or swipe card Enter # to continue Enter * to complete... -
Page 16: Register Normal User
Register Normal User Operating Steps Touch the keypad to power on the lock Press 0 and # to access into menu Verify administrator by card or password Press 2 to register user, and press # to continue Enter password or swipe card Enter # to continue Enter * to complete registering another normal... -
Page 17: Delete Admin
Delete Admin Operating Steps Touch the keypad to power on the lock Press 0 and # to access into menu Verify administrator by card or password Press 3 to delete admin, and press # to continue Enter 3 digit user number Enter # to continue deleting Enter * to complete another admin... -
Page 18: Delete Normal User
Delete Normal User Operating Steps Touch the keypad to power on the lock Press 0 and # to access into menu Verify administrator by card or password Press 4 to delete user, and press # to continue Enter 3 digit user number Enter # to continue deleting Enter * to complete another normal user... -
Page 19: Back Up Enroll
Back Up Enroll Operating Steps Touch the keypad to power on the lock Press 0 and # to access into menu Verify administrator by card or password Press 5 to back up enroll, and press # to continue Enter 3 digit user number Enter password or swipe card Enter # to continue backup Enter * to complete... -
Page 20: Volume Setting
Volume Setting Operating Steps Touch the keypad to power on the lock Press 0 and # to access into menu Verify administrator by card or password Press 6 to set volume, and press # to continue 1. High volume 2. Low volume 3. Silent mode Enter # to confirm P a g e | 17... -
Page 21: Language Setting
Language Setting Operating Steps Touch the keypad to power on the lock Press 0 and # to access into menu Verify administrator by card or password Press 7 to set language, and press # to continue 1. English 2. Spanish 3. Portuguese Enter # to confirm Note: There are only two language mode, English/Spanish, or English/Portuguese. -
Page 22: Lockout Mode
Lockout mode Operating Steps Press 0 and # to access into menu Verify administrator by card or password Press 8 to set lockout mode, and press # to continue 1. Enable 2. Disable Enter # to confirm P a g e | 19... -
Page 23: Normal Open Mode
Normal open mode Operating Steps Touch the keypad to power on the lock Press 0 and # to access into menu Verify administrator by card or password Press 9 to set normal open mode, and press # to continue 1. Enable 2. Disable Enter # to confirm P a g e | 20... - Page 24 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment Note: This equipment has been tested and found to comply with the?limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 25 Tel: +86 755-89602345 Fax: +86 755-89602394 www.zkteco.com © Copyright 2014. ZKTeco Inc. ZKTeco Logo is a registered trademark of ZKTeco or a related company. All other product and company names mentioned are used for P a g e | 21...