Page 1
User Manual AL30 & AL40 Series Smart Lock Version: 2.0 Date: December 2019...
Page 2
It is essential to replace the batteries when the lock indicates the low battery warning. v The Lock will turn to sleep mode if there is no activity on the lock for ten seconds. Need Help? For technical documents and more Please visit www.zkteco.com/en Email: online@zkteco.com...
Basic Function Structure 5. Lockout symbol 1. Fingerprint Sensor(Only for AL40B) 2. Touchscreen & Detection Area 6. Knob 3. Keyhole 7. Battery Cover 4. Reset Button 8. 9V Battery port Basic Information Group Capacity Function Verification Mode Card Max.100 Register/Delete User, Administrator Password Open the door,...
Initialization After installing the Lock, you must perform the Initialization process, as explained in the below steps: 1) Rotate the Knob to make the Latch Bolt in the extended position. 2) First, insert just 3 batteries in the Lock. 3) Use a needle or a pin to press hold the Reset Button.
9V External Battery The 9V external battery keeps the Lock operational even after the full discharge of the Lock battery. Note: The above battery must be a 9V alkaline battery (6LR61). Emergency Mechanical Key The mechanical key is used to open the door in an emergency situation. Note: Keep the mechanical key in a safe place.
How to Use Register First Administrator Method to Operate Touch the keypad to wake up the Lock Press 0 and # to access the Menu Enter a new three-digit User number e.g.001 Press Fingerprint thrice, or enter Password twice, or swipe Card Press # to continue Press * to complete registering another User...
Register another Administrator Method to Operate Touch the keypad to wake up the Lock Press 0 and # to access the Menu Verify administrator using Fingerprint, or Card, or Password and press # to confirm Press 1 and # key to enter Admin Registration mode Enter a new three-digit User number e.g.001 Press Fingerprint thrice, or enter Password twice, or swipe Card Press # to continue...
Delete Administrator Method to Operate Touch the keypad to wake up the Lock Press 0 and # to access the Menu Verify administrator using Fingerprint, or Card, or Password and press # to confirm Press 3 and # key to enter Administrator Deletion mode Enter the Three-digit User number to delete Press # to delete another Press * to complete...
Backup Enroll (User's additional verification details) Method to Operate Touch the keypad to wake up the Lock Press 0 and # to access the Menu Verify administrator using Fingerprint, or Card, or Password and press # to confirm Press 5 and # key to enter Backup Enroll mode Enter the Three-digit User number to Enroll Enter additional Fingerprint, Card or Password Press # to continue...