Page 1
User Manual TL300 Date: February 2020 Doc Version: 1.0 English Thank you for choosing our product. Please read the instructions carefully before operation. Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only.
Important Notes New locks can be unlocked by any kinds of authentication before registration by default. At least one administrator must be registered before any other operation. The lock is also equipped with mechanical keys for manual unlocking. Please keep the mechanical keys at a safe place.
Product Overview Keypad Battery & Card Detection Area Battery Compartments Cover Fingerprint Reset Button Sensor Handle Double Locking Knob Mechanical Key Hole Speaker Emergency Power Interface Definitions User Roles: The lock is designed for two user roles namely Administrator and User. The Administrator group has the permission to enter the menu and open the door, but the User group has permission to open the door only.
Always Open Mode: This function is to keep the door always unlocked, which is suitable for meeting rooms and places with no access restriction. Lockout Mode: When the lockout mode is set, only the administrator can open the door from outside. * Network Setting: This function is only available for Model TL300Z.
Programming the Features through Menu Mode Touch the keypad to activate the lock. Press the 0 and # keys to access the menu. Verify the administrator’s identity with his/her fingerprint or card, or by entering the password then pressing the # key to confirm. Enter the digit corresponding to the function to be performed by following the audio guide.
Always Open Mode and Lockout Mode cannot be enabled at the same time. When you enable one of the two modes, the previously enabled mode will be automatically cancelled. * Network Setting function is only available for Model TL300Z. Quick Start Attention: If the verification is failed for five times, the lock will generate an alarm.
Page 7
Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.