Denon AVR-X6200W Service Manual page 72

2-5. TUNER STEP mode (E2 / E3 only)
2-5.1. Actions
This is a special mode for enabling reception STEP of the ANALOG TUNER to be changed.
2-5.2. Starting up
While holding down buttons "STATUS" and "ZONE3 SOURCE" simultaneously, press the power button to turn on the
power.
Select the "5. TUNER FRQ SET" using the "CURSOR f / d " button, then press the "ENTER" button to confirm.
2-5.3. Displays
Start up this unit in TUNER STEP mode, select the desired option using the "CURSOR 0 / 1 " button, then enter using the
"ENTER" button.
The following information is displayed in the following order.
(a) AM9 kHz / FM50 kHz is selected
L1
* T U N E R
FLD
L2
<
"CURSOR 0 "
(b) AM10 kHz / FM200 kHz is selected
FLD L2
<
(c) Press the power button to turn off the power.
(d) Press the power button to turn on the power.
F R Q
A M 9 / F M 5 0
"CURSOR 1 "
A M 1 0 / F M 2 0 0
"ENTER"
S e t
>
>
72