Denon AVR-X6200W Service Manual page 23

1.5. Version Display in the Setup Menu
Follow the steps below to display the firmware information.
(1) Press the "SETUP" button on the remote control.
(2) Select "General - Information - Firmware".
The version information is displayed as a 14-digit number as shown in the screenshot below.
This 14-digit number comprises a part of the version number of each device and module.
These version numbers correspond to the 14-digit number as shown below.
Main X X 3 8
Sub
X X X 0 0 2 8
DSP1
X X X 2
DSP2
X X X 3
DSP3
X X X 4
DSP4 X X X 5
A.PLD
X X X 1
V.PLD
X X X 7
GUI
X X X X 0 0 1 6
E.FBL
X X X X X X
E.SBL
B X X X X X X X X X X X X
E.IMG
I X X X X X X X X 0 0 3 7
The firmware version numbers and this 14-digit version information are written in the Service Information.
b
General/Firmware
Version
XXXX - XXXX - XXXX - XX
GUI Image
The 2nd digit from the right for Main
The 1th digit from the right for Main
The 2nd digit from the right for Sub
The 1st digit from the right for Sub
Info display
The 1st digit from the right for DSP1
The 1st digit from the right for DSP2
The 1st digit from the right for DSP3
The 1st digit from the right for DSP4
The 1st digit from the right for A.PLD
The 1st digit from the right for V.PLD
The 1st digit from the right for GUI
The 1st digit from the right for IMG
The 2nd digit from the right for IMG
1 2 3 4 - 8 3 8 2
23
- 6 7 7 3 - 0 5