Scion Instruments 436-GC Service Manual page 64

436-GC/456-GC
Code Error Description
80 Zone 6 Shorted Sensor
Thermal Runaway (zone)
81 Column Oven Thermal Runaway
82 Zone 1 Thermal Runaway
83 Zone 2 Thermal Runaway
84 Zone 3 Thermal Runaway
85 Zone 4 Thermal Runaway
86 Zone 5 Thermal Runaway
87 Zone 6 Thermal Runaway
Max Temper Exceeded (zone)
88 Column Oven Max Temper Exceeded
89 Zone 1 Max Temper Exceeded
90 Zone 2 Max Temper Exceeded
91 Zone 3 Max Temper Exceeded
92 Zone 4 Max Temper Exceeded
93 Zone 5 Max Temper Exceeded
94 Zone 6 Max Temper Exceeded
Min Temper Exceeded (zone)
95 Column Oven Min Temper Exceeded
96 Zone 1 Min Temper Exceeded
97 Zone 2 Min Temper Exceeded
98 Zone 3 Min Temper Exceeded
99 Zone 4 Min Temper Exceeded
100 Zone 5 Min Temper Exceeded
101 Zone 6 Min Temper Exceeded
Too Slow Response (zone)
109 Column Oven too slow response
436-GC/456-GC Service Manual Revision B February 2019
SCION Instruments
Error level Cause Condition(s)
Error Shorted sensor. Defect Sensor
Error -
Error -
Error -
Error -
Error -
Error -
Error -
Error Defect Sensor
Error Defect Sensor
Error Defect Sensor
Error Defect Sensor
Error Defect Sensor
Error Defect Sensor
Error Defect Sensor
Turn device off. Temperature below -10 °C, only for
Error
non callable devices
Turn device off. Temperature below -10 °C, only for
Error
non callable devices
Turn device off. Temperature below -10 °C, only for
Error
non callable devices
Turn device off. Temperature below -10 °C, only for
Error
non callable devices
Turn device off. Temperature below -10 °C, only for
Error
non callable devices
Turn device off. Temperature below -10 °C, only for
Error
non callable devices
Turn device off. Temperature below -10 °C, only for
Error
non callable devices
Error Sensor not used (wrong used), mismatch heated
GC action
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
H2 flow set to 0.0 mL/min
Electronics off (all)
Page: 63
510 Error codes
Action needed
Check zone (6)
Check Column Oven zone
Check zone (1)
Check zone (2)
Check zone (3)
Check zone (4)
Check zone (5)
Check zone (6)
Check Column Oven zone
Check zone (1)
Check zone (2)
Check zone (3)
Check zone (4)
Check zone (5)
Check zone (6)
Check Column Oven zone
Check zone (1)
Check zone (2)
Check zone (3)
Check zone (4)
Check zone (5)
Check zone (6)
Check Column Oven zone