436-GC/456-GC
460 Procedures
Removal & Replacing the LUI assy on 436-GC
1. Open the display by pushing on the right hand side of the LUI.
2. Loosen the 4 Torx screws from the lid covering the LUI compartment.
3. Disconnect both the LUI RJ-45 data cable and Power cable.
4. Loosen the 4 Torx screws on the copper hinge to remove the complete LUI assy.
5. Reassemble is the reverse of removal.
SCION Instruments
Page: 54
436-GC/456-GC Service Manual Revision B February 2019