Yealink W80B Quick Start Manual

Dect ip multi-cell base station

Hide thumbs Also See for W80B:

Table of Contents

Download this manual

DECT IP Multi-Cell Base Station

W80B

Quick Start Guide(V83.10)

www.yealink.com

For W80B firmware 103.83.0.10 or later

For W53H firmware 88.83.0.20 or later

For W56H firmware 61.83.0.20 or later

Table of Contents

Page 1 DECT IP Multi-Cell Base Station W80B Quick Start Guide(V83.10) www.yealink.com For W80B firmware 103.83.0.10 or later For W53H firmware 88.83.0.20 or later For W56H firmware 61.83.0.20 or later...
Page 3: Package Contents
IEEE 802.3af compliant PoE Hub/Switch Note: If you choose method a, use Yealink supplied power adapter (5V/1.2A). A third-party power adapter may damage the base station. If you choose method b, you do not need to connect the power adapter.
Page 4 Assigning a Device Role The W80B is shipped as a base station. Before registering a handset to the W80B, you need to switch the W80B to the DM-Base role. Then, the W80B can work as a DECT Manager and base station.
Page 5: Registering The Handset
“Handset Subscribed”. Contact your system administrator for registering more handsets to the base station. The W80B must work with the W56H/W53H handset running a specific firmware version. When you register an older handset to the base station, the handset firmware will be automatically upgraded to a matched one.
Page 6 We are not liable for problems with Yealink device arising from • Do not open or mutilate the battery, released electrolyte is corrosive and the use of this product;...
Page 8 As one of the best providers in more than 140 countries and regions including the US, the UK and Australia, Yealink ranks No.1 in the global market share of SIP phones shipments.