Console Mode
Overview
Console Mode
Input and
Output
The VAXstation 4000 Model 90 console mode allows operation of a
console device, which can be one of the following:
A workstation video device and LK401 keyboard and mouse
A terminal connected to line three of the serial port
A remote system connected using the Ethernet
The console mode can be entered if:
The HALT parameter is set to halt when power is turned on.
A HALT instruction is executed with the HALT action set
to HALT or a severe processor condition occurs (such as an
invalid interrupt stack).
An external HALT is detected (pressing the halt button on
the front panel).
In console mode input and output (I/O) routines are used by:
Self-Test
Extended self-test
Utilities
System test
Virtual memory boot (VMB)
2–5