Appendix Ii Emc Information; Guidance And Manufacture's Declaration; A2.1 Electromagnetic Emissions - For All Equipment And Systems - Henry Schein HS-Vet Instructions For Use Manual

Appendix II EMC Information

-Guidance
Declaration
Refer to the following tables for specific information regarding
this device's compliance to IEC/EN 60601-1-2.
A2.1 Electromagnetic Emissions - for all
EQUIPMENT and SYSTEMS
Guidance and manufacturer's declaration – electromagnetic
The device is intended for use in the electromagnetic
environment specified below. The customer or the user of the
device should assure that it is used in such an environment.
Emissions test
RF emissions
CISPR11
RF emissions
CISPR11
Harmonic emissions
IEC/EN61000-3-2
Voltage fluctuations
/flicker emissions
IEC/EN61000-3-3
and
emissions
Compliance
Group 1
Class B
N/A
N/A
57
Manufacture's
Electromagnetic
environment -guidance
The device uses RF
energy only
internal
Therefore,
emissions are very low
and are not likely to
cause any interference
in nearby
equipment.
The device is suitable
for use in all
establishments other
than domestic and those
directly connected to the
public low-voltage
power supply net work
that supplies buildings
for its
function.
its RF
electronic