to change ID, he should change Data Storage to OFF, then set a
new ID.
Data stored in the oximeter can be exported through Oximeter
Viewer Data Management Software. Please refer to section 3.2.4
for Data transfer procedure.
displays in
When the memory space is full, an icon
information area. Meanwhile Data Storage changes to OFF
automatically. Restart the oximeter and a dialog box pops up. The
user should confirm it to delete all the data.
Figure 3-14 Memory Space Full
3.3.13 Delete All Data
Delete All Data is used to delete all the stored data. Choose this
item by pressing the Function button, a dialog box pops up as
follows:
Figure 3-15 Delete all the data
If you choose YES to delete all the data, the deleting progress
shows:
37