Operation; Preparation For Operation; Overall Menu Structure; Figure 5 Main Menu Structure - Michell Instruments MDM25 User Manual

OPERATION

3 OPERATION
3.1

Preparation for Operation

Press the power-on button and observe the readings on the LCD. Some 3rd values may
take a few seconds to calculate, depending upon the %RH and ambient temperature
(Ta).
If using the MDM25 alongside the S503 RH calibrator, adjust the display orientation to
allow for the product to be read correctly when upside down.
If there is there is no reading on the screen check the battery orientation. Replace with
new batteries if required.
3.2

Overall Menu Structure

DISPLAY
BACKLIGHT
CONTRAST
8
MAIN MENU
DISPLAY AUTO OFF
ORIENTATION
Figure 5
MDM25 User's Manual
DEVICE
TEMP UNITS 3RD VALUE
Main Menu Structure
97234 Issue 4, January 2018
ABOUT
FIRMWARE VERSION