FM 351, programming
6. Accept the FM 351 parameters in your configuration by selecting "File > Save", then
close the configuration software with "File > Exit".
7. Save your configuration to your project with "Station > Save and compile".
8. When the CPU is in STOP, select "PLC > Load to module..." to download the
configuration.
The data is now transferred directly to the CPU and FM 351. As long as all configuration
data remains backed up in CPU memory, the CPU always transfers these to the FM 351 at
each STOP to RUN transition.
14
FM 351 First Steps in Commissioning
Getting Started, 07/2007, A5E01092707-01