Trigger; [:Immediate]; Source - Agilent Technologies HP E1355A User Manual

TRIGger

Subsystem Syntax

[:IMMediate]

Comments
Example

:SOURce

Parameters
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The TRIGger subsystem commands control the triggering operations of the
multiplexer switchbox.
TRIGger
[:IMMediate]
:SOURce < source >
:SOURce?
executes a trigger when the defined trigger source is
TRIGger[:IMMediate]
or
TRIGger:SOURce HOLD
is NOT the same as
TRIGger[:IMMediate]
•
Executing the
TRIGger[:IMMediate]
must be defined with
INITiate[:IMMediate]
TRIGger[:IMMediate]
•
HOLD or BUS Source Remains: If selected, the
or
HOLD TRIGger:SOURce BUS
triggering the switchbox with the
•
Related Commands:
Advancing Scan using the
TRIG:SOUR HOLD
SCAN (@100:107)
INIT
loop statement
TRIG
increment loop
<source> specifies the trigger source to advance the
TRIGger:SOURce
channel list during scanning.
Parameter Name
BUS
DBUS
EXTernal
HOLD
IMMediate
Strain Gage Multiplexer Command Reference
TRIGger:SOURce BUS
TRIGger:SOURce IMMediate
Command: A channel list
channel_list
[ROUTe:]SCAN <
command must be executed before
can trigger the switchbox.
commands remain in effect after
TRIGger[:IMMediate]
INITiate , [ROUTe:]SCAN
TRIGger Command
Sets trigger source to hold.
Sets channel list.
Starts scanning cycle.
Start count loop.
Advances scan to next channel.
Increment count loop.
Parameter Type
Discrete
Discrete
Discrete
Discrete
Discrete Continuous triggering
. Note that
.
and an
>
TRIGger:SOURce
command.
Range of Values
*TRG command
Digital Bus
Event In BNC port
Hold triggering
95