[Route:]; Close - Agilent Technologies HP E1355A User Manual

[ROUTe:]

Subsystem Syntax

CLOSe

Parameters
Comments
80 Strain Gage Multiplexer Command Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The [ROUTe:] subsystem controls switching and scanning operations for the
multiplexer modules in a switchbox configuration.
[ROUTe:]
CLOSe < channel_list
CLOSe? < channel_list
channel_list
OPEN <
channel list
OPEN? <
SCAN < channel_list
:MODE < mode >
:MODE?
:PORT < port >
:PORT?
SETTling
[:TIME] < time >
:TIME? [MIN | MAX] <
[ROUTe:]CLOSe <channel_list> closes multiplexer channels specified in
the channel list.
For the relay strain gage multiplexers, the channel_list for
form ( @ccnn ), ( @ccnn,ccnn
(00-99) and nn = channel number (00-15 - includes internal channels).
For the FET strain gage multiplexers, the channel_list for
form ( @ccnn ), or in special circumstances, (
number (00-99) and = channel number (00-15 includes internal channels).
nn
Before using the CLOSe command with the FET multiplexers, you must
specify the
SCAN:MODE
what tree switches will be closed on a given channel. You can only have
one channel closed on a FET multiplexer at a time. If you want to close
a channel on two different multiplexers in the same switchbox instrument
(e.g., 102,202) you can use (
Parameter Name
channel_list
•
Closing Channels - relay multiplexers: To close:
a single channel, use
–
multiple channels, use
–
sequential channels, use
–
a group of sequential channels, use
–
>
>
>
>
>
, < channel_list >
channel_list
>
), or ( @ccnn:ccnn ) where
@ccnn,ccnn
and , as these commands determine
SCAN:PORT
).
@ccnn,ccnn
Parameter Type
Numeric
( );
CLOSe @ccnn
CLOSe ( @ccnn,ccnn
CLOSe ( @ccnn:ccnn
CLOSe
is in the
CLOSe
cc = card number
CLOSe is in the
), where cc = card
Range of Values
cc00 - cc15
);
);
( @ccnn:ccnn,ccnn:ccnn ).
Chapter 5