Installation; Mounting Tips - Escort MAX 360c Quick Reference

Installation

Your new detector comes with our latest EZ Mag
Mount™. Simply tilt the display end of the
detector up and slide it onto the mounting
bracket. The magnetic mount holds the detector
in place. To remove the detector from the mount,
simply lift the display end of the detector and the
detector releases from the mount.

Mounting Tips:

• Center of windshield between driver and
passenger.
• Ensure clear view of road ahead and sky
above.
• Avoid windshield wipers and heavily tinted
areas.
To mount the detector in your vehicle:
1 Remove paper backing from EZ Mag Mount™
StickyCup.
2 Ensure the locking clamp is open.
MAX 360c
3 Firmly press EZ Mag Mount™ StickyCup onto
windshield and close the locking clamp to
secure.
4 To adjust view, loosen thumb wheel and adjust
angle of mounting bracket. Tighten thumb
wheel to secure.
5 Tilt the display end of the detector slightly
upward and engage with the flanged edge
of the mounting bracket. The EZ Mag Mount™
magnet holds the detector in place.
6 To remove the detector, simply lift the display
end of the detector upward. The detector will
release from the mount.
7 To remove mount from windshield, release
locking clamp and pull tab on top of StickyCup.
EZ Mag Mount™ Care Instructions:
Should the EZ Mag Mount™ StickyCup accumulate
debris and lose its stickiness, simply rinse under
warm water, gently wipe off debris and allow to
air dry.
EZ Mag Mount™
4
Release Tab
StickyCup
Locking Clamp (closed)
Thumb Wheel For
Angle Adjustment
Mounting Bracket