Panasonic KX-TDE200 Getting Started page 23

Assigning the BRI Setting (Automatic Configuration)
1. a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the BRI card.
A menu will be shown under the mouse
pointer.
c.
Click Ous to set the card to out-of-service
status.
Click Tool → BRI Automatic Configuration
2.
from the menu bar.
3.
a.
Click Check to turn on the BRI card.
b.
Click OK.
4.
a.
Enter the subscriber number for the desired
ports in Subscriber.
b.
Click Execute.
Note
Network settings are automatically set.
c.
Click Check Box of the desired ports.
d.
Click Data Apply.
e.
Click Close.
5. a.
Under Configuration, click Slot.
b.
Move the mouse pointer over the BRI card,
then click INS to set the card to in-service
status.
4.1 Programming the PBX
Getting Started for Physical Cards 23