Cisco C395 Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Security System
  5. C395
  6. Hardware installation manual

Cisco C395 Hardware Installation Manual

Hide thumbs Also See for C395:
Table of Contents

Advertisement

Quick Links

Download this manual
Cisco Email Security Appliance C195, C395, C695, and C695F Hardware
Installation Guide
First Published: 2019-07-08
Last Modified: 2023-01-23
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Advertisement

Table of Contents
loading

Related Manuals for Cisco C395

Summary of Contents for Cisco C395

  • Page 1 Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide First Published: 2019-07-08 Last Modified: 2023-01-23 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html.

  • Page 3: Table Of Contents

    Site Environment Site Considerations Power Supply Considerations Rack Configuration Considerations C H A P T E R 3 Rack-Mount the Chassis Unpack and Inspect the Chassis Rack-Mount the Chassis Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 4 Maintenance and Upgrade Power Button Shut Down Enable RPC Reset the Chassis Remotely Install/Uninstall the Locking Faceplate Remove and Replace a Drive Remove and Replace a Power Supply Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 5: Features

    Power Cord Specifications, on page 16 Features The Cisco Email Security Appliances (ESA) C195, C395, C695, and C695F are designed to serve as your SMTP email gateway at your network perimeter—that is, the first ESA with an IP address that is directly accessible to the internet for sending and receiving email.
  • Page 6 Two fiber optic (DATA 2 and DATA 3) Remote power Accessed through the 1-Gb dedicated port cycling (RPC) USB ports Two USB 3.0 Type A SFP+ ports Two fiber optic Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 7: Overview

    RAID 10, hot-swappable Package Contents The following figure shows the package contents for the ESA C195, C395, C695, and C695F. Note that the contents are subject to change and your exact contents might contain additional or fewer items. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 8: Serial Number Locations

    Serial Number Locations The serial number (SN) for the ESA C195, C395, C695, and C695F is printed on the pullout asset card located on the front panel as shown in the following figure. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 9 Caution The cover latch on the top of the chassis cover is not supported. There are no internal field-replaceable parts in the ESA C195, C395, C695, and C695F. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 10: Front Panel

    The following figure shows the front panel features and disk-drive configuration for the ESA C195. See Front Panel LEDs, on page 8 for a description of the LEDs. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 11 The following figure shows the front panel features and disk-drive configuration for the ESA C695 and C695F. Front Panel LEDs, on page 8 for a description of the LEDs. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 12: Front Panel Leds

    Temperature status LED Pullout asset card — Front Panel LEDs The following figure shows the front panel LEDs for the C195, C395, C695, and C695F, and describes their states. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 13 • Amber—The chassis is in standby mode. • Blue, flashing—The unit identification • Green—The chassis is in main power mode. function is activated. Power is supplied to all components. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 14 • Green—The chassis is operating at normal temperature. • Amber—One or more temperature sensors breached the critical threshold. • Amber, flashing—One or more temperature sensors breached the nonrecoverable threshold. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 15: Rear Panel

    Not supported have internal grounding, so no additional chassis grounding is required. The following figure shows the rear panel of the ESA C395 and C695. See Rear Panel LEDs, on page 13 a description of the LEDs. Figure 9: C395 and C695 Rear Panel USB 3.0 Type A (USB 1)
  • Page 16 770-W AC power supply (PSU 2) Threaded holes for dual-hole grounding lug Use is optional. The supported AC power supplies have internal grounding, so no additional chassis grounding is required. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 17: Rear Panel Leds

    The following figure shows the rear panel LEDs of the ESA C195 model and describes the LED states. The C395, C695, and C695F have the same LEDs except that these models have more data interfaces; the speed and status LED descriptions are the same.

  • Page 18: Power Supply

    Power Supply The power supply is hot-swappable. For the C195, you can order a second power supply for redundancy as 1+1. The C395, C695, and C695F ship with two power supplies thus providing for redundancy. Note Make sure that one power supply is always active.

  • Page 19: Hardware Specifications

    Form factor RSP2 Input connector IEC320 C13/C15 Hardware Specifications The following table lists the hardware specifications for the ESA C195, C395, C695, and C695F. Table 3: ESA C195, C395, C695, and C695F Hardware Specifications Specification C195 C395 C695 C695F Dimensions (H x W 1.7 x 16.89 x 29.8 inches (4.32 x 43.0 x 75.6 cm)

  • Page 20: Product Id Numbers

    Product ID Numbers Product ID Numbers The following table lists the field-replaceable PIDs associated with ESA C195, C395, C695, and C695F. The spare components are ones that you can order and replace yourself. If any internal components fail, you must get an RMA for the entire chassis including the SFPs and SFP cables.
  • Page 21 Cord set rating: 10 A, 250 V Connector: IEC 60320/C15 — Figure 14: Brazil (PWR-250V-10A-BZ) Plug: NBR 14136 Cord set rating: 10 A, 250 V Connector: IEC 60320/C13 — Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 22 Connector: HS10S, C-13 to C-14 (recessed — receptacle) Figure 17: Cabinet Jumper (CAB-C13-CBN) Plug: SS10A Cord set rating: 10 A, 250 V Connector: HS10S, C-13 to C-14 — Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 23 Cord set rating: 10 A/16 A, 250 V Connector: IEC 60320/C15 (VSCC 15) — Figure 20: India (CAB-250V-10A-ID) Plug: IS 6538-1971 Cord set rating: 16 A, 250 V Connector: IEC 60320-C13 — Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 24 Cord set rating: 10 A, 250 V Connector: IEC 60320/C15 — (EN 60320/C15M) Figure 23: Japan (CAB-JPN-3PIN) Plug: JIS 8303 Cord set rating: 12 A, 125 V Connector: IEC 60320/C13 — Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 25 Cord set rating: 10 A, 250 V Connector: IEC 60320/C15 — Figure 26: North America (CAB-9K12A-NA) Plug: NEMA5-15P Cord set rating: 13 A, 125 V Connector: IEC 60320/C15 — Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 26 Cord set rating: 13 A, 250 V Connector: IEC 60320/C13 — Figure 29: Switzerland (CAB-9K10A-SW) Plug: SEV 1011 (MP232-R) Cord set rating: 10 A, 250 V Connector: IEC 60320/C15 — Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 27 Cord set rating: 10 A, 125 V Connector: IEC 60320/C13 — Figure 31: United Kingdom (CAB-9K10A-UK) Plug: BS1363A/SS145 Cord set rating: 10 A, 250 V Connector: IEC 60320/C15 — Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 28 Overview Power Cord Specifications Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 29: Installation Preparation

    Statement 1005—Circuit Breaker This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that the protective device is rated not great than: 250 V, 15 A. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 30 The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Warning Statement 1053 Class 1M Laser Radiation Hazard level 1M invisible laser radiation is present. Do not view directly with nonattenuating optical instruments. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 31: Safety Recommendations

    • Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension cables, frayed power cords, and missing safety grounds. • If an electrical accident occurs: Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 32: Prevent Esd Damage

    • Use the chassis within its marked electrical ratings and product usage instructions. • The Cisco Content Security Appliance x95 Series are equipped with an AC-input power supply, which is shipped with a three-wire electrical cord with a grounding-type plug that fits into a grounding-type power outlet only.

  • Page 33: Power Supply Considerations

    • Baffles can help to isolate exhaust air from intake air, which also helps to draw cooling air through the chassis. The best placement of the baffles depends on the airflow patterns in the rack. Experiment with different arrangements to position the baffles effectively. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 34 Installation Preparation Rack Configuration Considerations Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

  • Page 35: Rack-Mount The Chassis

    • Effect of damage on the installation Rack-Mount the Chassis Before you begin You can install the chassis in a rack using the Cisco rack kit (part number 800-43376-02). Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 36 Install the second inner rail to the opposite side of the chassis. Figure 32: Attach the Inner Rail to the Side of the Server Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 37 Slide the release clip toward the rear on both inner rails, and then continue pushing the chassis into the rack until its front slam latches engage with the rack posts Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 38 What to do next Install the cables according to your default software configuration as described in the Getting Started Guide for your software version. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 39 To avoid data loss or damage to your operating system, perform a graceful shutdown of the operating system. • Graceful shutdown—Press and release the Power button. The operating system performs a graceful shutdown and the chassis goes into standby mode. The power LED is amber. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 40 Enter commit to save your changes. Step 6 Test your configuration to verify that you can remotely manage chassis power. What to do next Reset the Chassis Remotely, on page 37 Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 41 Install/Uninstall the Locking Faceplate The locking faceplate (Cisco part number 74-115098-01 for a 1 RU chassis and Cisco part number 74-115099-01 for a 2 RU chassis) ships with the key you need to lock the faceplate to the front panel of the chassis. The locking faceplate clicks in between the two side handles on the front panel.
  • Page 42 You cannot add more drives to the chassis. You can only replace the drives in the slots that are supported for your model. Safety Warnings Take note of the following warnings: Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 43 Press the release button on the face of the drive tray. b) Grasp and open the ejector lever and then pull the drive tray out of the slot. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 44 Step 2 Remove the four drive-tray screws that secure the drive to the tray and then lift the drive out of the tray. Figure 37: Remove the Drive Tray Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 45 Warning Statement 1019 Main Disconnecting Device The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 46 Remove the power cord from the power supply that you are replacing. c) Grasp the power supply handle while pinching the release lever toward the handle. d) Pull the power supply out of the bay. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 47 Connect the power cord to the new power supply. d) If you shut down the chassis, press the Power button to return it to main power mode. Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...
  • Page 48 Maintenance and Upgrade Remove and Replace a Power Supply Cisco Email Security Appliance C195, C395, C695, and C695F Hardware Installation Guide...

This manual is also suitable for:

C195C695C695f

Table of Contents