1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Firewall
  5. M195
  6. Hardware installation manual

Cisco M195 Hardware Installation Manual

Content security management appliance
Hide thumbs
Table of Contents

Advertisement

Quick Links

Cisco Content Security Management Appliance M195, M395, M695,
and M695F Hardware Installation Guide
First Published: 2019-07-08
Last Modified: 2019-08-06
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883

Advertisement

Table of Contents
loading

Related Manuals for Cisco M195

Summary of Contents for Cisco M195

  • Page 1 Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide First Published: 2019-07-08 Last Modified: 2019-08-06 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 Cisco has more than 200 offices worldwide. Addresses and phone numbers are listed on the Cisco website at www.cisco.com/go/offices. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com...

  • Page 3: Table Of Contents

    Site Considerations Power Supply Considerations Rack Configuration Considerations C H A P T E R 3 Rack-Mount the Chassis Unpack and Inspect the Chassis Rack-Mount the Chassis Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 4 Maintenance and Upgrade Power Button Shut Down Enable RPC Reset the Chassis Remotely Install/Uninstall the Locking Faceplate Remove and Replace a Drive Remove and Replace a Power Supply Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 5: Overview

    They also allow automated data backups. The SMA M195, M395, M695, and M695F support Cisco AsyncOS version 12.5 and later. See Product ID Numbers, on page 17 for a list of field-replaceable product IDs (PIDs) associated with the SMA security management appliances.
  • Page 6 Overview Features Figure 2: Cisco Content Security M695 and M695F The following table lists the features of the SMA M195, M395, M695, and M695F. Table 1: SMA M195, M395, M695, and M695F Features Feature M195 M395 M695 M695F Form factor...
  • Page 7 Internal component only; not field-replaceable. If one fan fails, you must send your chassis for RMA. Storage Two 600-GB SAS Eight 600-GB SAS Sixteen 600-GB SAS HDDs HDDs HDDs RAID 10, hot-swappable RAID 1, RAID 10, hot-swappable hot-swappable Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 8: Package Contents

    Serial Number Locations The serial number (SN) for the SMA M195, M395, M695, and M695F is printed on the pullout asset card located on the front panel as shown in the following figure. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 9 The cover latch on the top of the chassis cover is not supported. There are no internal field-replaceable parts in the SMA M195, M395, M695, and M695F. Figure 5: Serial Number Location on Cover Serial number label Cover latch Not supported Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 10: Front Panel

    Overview Front Panel Front Panel The following figure shows the front panel features and disk-drive configuration for the SMA M195. See Front Panel LEDs, on page 8 for a description of the LEDs. Figure 6: M195 Front Panel Drive bays...
  • Page 11 The following figure shows the front panel features and disk-drive configuration for the SMA M695 and M695F. See Front Panel LEDs, on page 8 for a description of the LEDs. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 12: Front Panel Leds

    Network link activity LED Pullout asset card Front Panel LEDs The following figure shows the front panel LEDs for the M195, M395, M695, and M695F, and describes their states. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 13 • Amber—The chassis is in standby mode. • Blue, flashing—The unit identification • Green—The chassis is in main power mode. function is activated. Power is supplied to all components. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 14 • Green—The chassis is operating at normal temperature. • Amber—One or more temperature sensors breached the critical threshold. • Amber, flashing—One or more temperature sensors breached the nonrecoverable threshold. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 15: Rear Panel

    LEDs. Figure 11: M395 Rear Panel USB 3.0 Type A (USB 1) USB 3.0 Type A (USB 2) Management interface (MGMT) Data interface (DATA 5) Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 16 Use is optional; the supported AC power supplies have internal grounding, so no additional chassis grounding is required. USB 3.0 Type A (USB 2) Management interface (MGMT) Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 17 Management interface (MGMT) Data interface (DATA 1) RPC port (RPC) Serial console port (Console) Unit identification button RJ-45 connector that directly connects a computer to the appliance. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 18: Rear Panel Leds

    Rear Panel LEDs The following figure shows the rear panel LEDs of the SMA M195 model and describes the LED states. The M395, M695, and M695F have the same LEDs except that these models have more data interfaces; the speed and status LED descriptions are the same.

  • Page 19: Power Supply

    12-V main power off ( for example, overcurrent, overvoltage, or overtemperature failure). Power Supply The following table lists the specifications for the 770-W AC power supply (Cisco part number 341-0591-04) used in the SMA M195 and M395. Table 2: 770-W Power Supply Specifications Description Specification...

  • Page 20: Hardware Specifications

    Form factor RSP2 Input connector IEC320 C13/C15 The following table lists the specifications for the 1050-W AC power supply (Cisco part number 341-0638-03) used in the SMA M695 and 695F. Table 3: 1050-W Power Supply Specifications Description Specification AC input voltage range Nominal range: 100 to 120 V AC, 200 to 240 V AC Range: 90–132 V AC, 180–264 V AC...

  • Page 21: Product Id Numbers

    Operation at 73°F (23°C) Product ID Numbers The following table lists the field-replaceable PIDs associated with SMA M195, M395, M695, and M695F. The spare components are ones that you can order and replace yourself. If any internal components fail, you must RMA the entire chassis including the SFPs and SFP cables.

  • Page 22: Power Cord Specifications

    Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with the system. The following power cords and jumper cords are supported. Figure 15: Argentina CAB-250V-10A-AR Plug: IRAM 2073 Cord set rating: 10 A, 250 V Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 23 Cord set rating: 10 A, 250 V Connector: IEC 60320/C13 Figure 18: Cabinet Jumper CAB-C13-C14-2M Plug: SS10A Cord set rating: 10A, 250V Connector: HS10S, C-13 to C-14 Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 24 Cord set rating: 10 A, 250 V Connector: HS10S, C-13 to C-14 Figure 21: China CAB-250V-10A-CH Plug: GB2099.1/2008 Cord set rating: 10 A, 250 V Connector: IEC 60320/C13 Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 25 Plug: IS 6538-1971 Cord set rating: 16 A, 250 V Connector: IEC 60320-C13 Figure 24: Israel CAB-250V-10A-IS Plug: SI-32 Cord set rating: 10 A, 250 V Connector: IEC 60320-C13 Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 26 Cord set rating: 12 A, 125 V Connector: IEC 60320/C13 Figure 27: Japan CAB-C13-C14-2M-JP Plug: EN 60320-2-2/E Cord set rating: 10 A, 250 V Connector: EN 60320/C13 to C14 Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 27 Cord set rating: 13 A, 125 V Connector: IEC 60320/C15 Figure 30: North America CAB-N5K6A-NA Plug: NEMA6-15P Cord set rating: 10 A, 125 V Connector: IEC 60320/C13 Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 28 Cord set rating: 10 A, 250 V Connector: IEC 60320/C15 Figure 33: Taiwan CAB-ACTW Plug: EL 302 (CNS10917) Cord set rating: 10 A, 125 V Connector: IEC 60320/C13 Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 29 Overview Power Cord Specifications Figure 34: United Kingdom CAB-9K10A-UK Plug: BS1363A/SS145 Cord set rating: 10 A, 250 V Connector: IEC 60320/C15 Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 30 Overview Power Cord Specifications Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 31: Installation Preparation

    Statement 1005—Circuit Breaker This product relies on the building's installtion for short-circuit (overcurrent) protection. Ensure that the protective device is rated not great than: 250 V, 15 A. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 32: Safety Recommendations

    • Keep tools away from walkways, where you and others might trip over them. • Do not wear loose clothing or jewelry, such as earrings, bracelets, or chains that could get caught in the chassis. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 33: Maintain Safety With Electricity

    • Use the chassis within its marked electrical ratings and product usage instructions. • The Cisco Content Security Appliance x95 Series are equipped with an AC-input power supply, which is shipped with a three-wire electrical cord with a grounding-type plug that fits into a grounding-type power outlet only.

  • Page 34: Site Environment

    • Several styles of AC-input power supply cords are available for the chassis; make sure that you have the correct style for your site. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 35: Rack Configuration Considerations

    • Baffles can help to isolate exhaust air from intake air, which also helps to draw cooling air through the chassis. The best placement of the baffles depends on the airflow patterns in the rack. Experiment with different arrangements to position the baffles effectively. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 36 Installation Preparation Rack Configuration Considerations Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 37: Rack-Mount The Chassis

    • Effect of damage on the installation Rack-Mount the Chassis You can install the chassis in a rack using the Cisco rack kit (part number 800-43376-02). The rack must be of the following type: Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 38 Install the second inner rail to the opposite side of the chassis. Figure 35: Attach the Inner Rail to Side of Server Front of chassis Locking clip on inner rail Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 39 Slide the release clip toward the rear on both inner rails, and then continue pushing the chassis into the rack until its front slam latches engage with the rack posts Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 40 What to do next Install the cables according to your default software configuration as described in the Getting Started Guide for your software version. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 41: Power Button Shut Down

    • Graceful shutdown—Press and release the Power button. The operating system performs a graceful shutdown and the chassis goes into standby mode. The power LED is amber. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 42: Enable Rpc

    Enter commit to save your changes. Step 6 Test your configuration to verify that you can remotely manage chassis power. What to do next Reset the Chassis Remotely Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 43: Reset The Chassis Remotely

    Install/Uninstall the Locking Faceplate The locking faceplate (Cisco part number 74-115098-01 for a 1 RU chassis and Cisco part number 74-115099-01 for a 2 RU chassis) ships with the key you need to lock the faceplate to the front panel of the chassis. The locking faceplate clicks in between the two side handles on the front panel.

  • Page 44: Remove And Replace A Drive

    To uninstall the faceplate, unlock the faceplate, push the latch to the right, and pull the faceplate out. Remove and Replace a Drive Note The drives are hot-swappable. You do not have to shut down the chassis to remove or replace drives. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 45 Press the release button on the face of the drive tray. b) Grasp and open the ejector lever and then pull the drive tray out of the slot. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 46 Remove the four drive-tray screws that secure the drive to the tray and then lift the drive out of the tray. Figure 40: Remove the Drive Tray Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

  • Page 47: Remove And Replace A Power Supply

    (1+1). Note The M195 ships with one power supply, but you can add another one for redundancy. The chassis also supports cold redundancy. Depending on the power being drawn by the chassis, one power supply might actively provide all power to the system while the remaining power supply is put into a standby state.
  • Page 48 Remove the power cord from the power supply that you are replacing. c) Grasp the power supply handle while pinching the release lever toward the handle. d) Pull the power supply out of the bay. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 49 Connect the power cord to the new power supply. d) If you shut down the chassis, press the Power button to return it to main power mode. Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...
  • Page 50 Maintenance and Upgrade Remove and Replace a Power Supply Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide...

This manual is also suitable for:

M695fM395M695C195C395C695 ... Show all

Table of Contents