Cisco M195 Hardware Installation Manual page 17

Overview
11
13
The following figure shows the rear panel of the SMA M695F. See
description of the LEDs.
Figure 13: M695F Rear Panel
1
3
5
7
9
11
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
Data interface (DATA 5)
Serial console port (Console)
RJ-45 connector that directly connects
a computer to the appliance.
Data interface (DATA 2)
1/10-Gigabit SFP+ fiber optic support
Use only Cisco-supported SFP+
transceivers.
1050-W AC power supply (PSU 1)
Threaded holes for dual-hole
grounding lug
Use is optional; the supported AC
power supplies have internal
grounding, so no additional chassis
grounding is required.
USB 3.0 Type A (USB 2)
Data interface (DATA 1)
Serial console port (Console)
RJ-45 connector that directly connects
a computer to the appliance.
12 RPC port (RPC)
14 Unit identification button
Rear Panel LEDs, on page 14
2 Data interface (DATA 3)
1/10-Gigabit SFP+ fiber optic support
Use only Cisco-supported SFP+
transceivers.
1050-W AC power supply (PSU 2)
4
USB 3.0 Type A (USB 1)
6
8 Management interface (MGMT)
10 RPC port (RPC)
12 Unit identification button
Rear Panel
for a
13