Remove And Replace A Drive - Cisco M195 Hardware Installation Manual

Remove and Replace a Drive

Figure 38: Locking Faceplate
1 Latch
Spring-mounted tab
3
Step 2
Press in the left side of the faceplate into the left side handle on the front panel. The tabs are spring-mounted to the latch,
so they push in as the faceplate is installed.
Step 3
Lock the faceplate using the key that shipped with the faceplate.
Step 4 To uninstall the faceplate, unlock the faceplate, push the latch to the right, and pull the faceplate out.
Remove and Replace a Drive
Note
The drives are hot-swappable. You do not have to shut down the chassis to remove or replace drives.
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
40
2 Key hole
Spring-mounted tab
4
Maintenance and Upgrade