Cisco M195 Hardware Installation Manual page 16

Rear Panel
5
7
9
11
13
15
The following figure shows the rear panel of the SMA M695. See
description of the LEDs.
Figure 12: M695 Rear Panel
1
3
5
7
9
Cisco Content Security Management Appliance M195, M395, M695, and M695F Hardware Installation Guide
12
RPC port (RPC)
Unit identification button
770-W AC power supply (PSU 2)
Data interface (DATA 1)
Data interface (DATA 3)
Riser handle
Not supported
Data interface (DATA 1)
Data interface (DATA 3)
1050-W AC power supply (PSU1)
Threaded holes for dual-hole
grounding lug
Use is optional; the supported AC
power supplies have internal
grounding, so no additional chassis
grounding is required.
USB 3.0 Type A (USB 2)
6 Serial console port (Console)
RJ-45 connector that directly connects
a computer to the appliance.
770-W AC power supply (PSU 1)
8
10 Threaded holes for dual-hole
grounding lug
Use is optional; the supported AC
power supplies have internal
grounding, so no additional chassis
grounding is required.
12 Data interface (DATA 2)
14 Data interface (DATA 4)
Rear Panel LEDs, on page 14
2 Data interface (DATA 2)
4 Data interface (DATA 4)
6 1050-W AC power supply (PSU 2)
8 USB 3.0 Type A (USB 1)
10 Management interface (MGMT)
Overview
for a