Explanation Of Characters - Yamato IC103C Manual

Characters on the controller are explained in this section.
Characters
*See the section "Operation mode・function setting keys and characters" on page 18 for characters
of operation modes and functions.
3. Names and functions of parts
Identifier Name
AStP Auto stop setting
AStr Auto start setting
End Time up
cAL Calibration offset setting
Lock Key lock of settings
Power outage compen-
Pon
sation setting

Explanation of characters

Used for setting auto stop operation.
Used for setting auto start operation.
Displayed when timer operation has
ended.
See pages 20 and 22.
Used for inputting a calibration offset
temperature
See section "Using the calibration
offset function" on page 26.
Key locks settings to prevent their
alteration
See section "Using the lock function"
on page 28.
Selects operations after recovery from
power outage.
See section "Using the power outage
compensation function" on page 29.
15
Application