Hard Floorcleaning - Bissell PROheat 25A3 Series User Manual

Hard FloorCleaning
Yourdeepcleanermay haveincluded a hard
floortooland HardRoorSolutions Formula.The
hardfloortoolprovideseffectivecleaningfor
linoleum, v inyl,andtile floors.
Caution: D onotuseon unsealed hardwood floors.
1.
Thoroughlyvacuum or sweep floor to pick
up any debris.
NOTE:Priorto fillingwith formulaand
water he sureall carpetcleaningformulais
thoroughly r insedfrom tank.
2.
3.
FillBISSELL HardFloorSolutionsFormulato
the indicatedfill line in the built in measuring
cup and pourinto mouthof bladder.
Fillthe bladderwith clean hot tap water and
set aside.
4.
5.
Attach the hard floor tool to the bottom of
the machineby hooking it into the nozzle
andswinging it down until it clicks into
place.
Be surethe ReadyTools d ial is set to
FLOOR CLEANING.
6.
7.
8.
Plug into an outlet andturn the power on.
Planyour cleaning routeto leave an exit
path. Be sureto allow adequatetime for
floorsto dry.
While pressingthe spraytrigger, make one
slow forward wet pass and another back.
Caution: Do Not Overwet.
9.
10.
Repeatthe motion without pressingthe
trigger using the hard floor tool to squeegee
andsuction up the dirty water.
Whenfinished, removehard floor tool,
rinse andlet dry beforestoring. Referto
the Maintenancesectionon page 15 for
machineclean up and storageinstructions.
4,
14 www=bissell.com
800,237.7691
ug120-4078 25A3 908.indd 14 10/14/08 1:21:08 PM