Related Manuals for Bissell 2503 Series
Summary of Contents for Bissell 2503 Series
- Page 1 EV675 Robotic Vacuum ___________ USER GUIDE 2503 SERIES More of a video person? Find instructional videos for all sections with this icon at www.BISSELL.com/videos...
-
Page 2: Safety Instructions
» Do not plug in your vacuum cleaner UNTIL you are familiar with all instructions and operating procedures. » To reduce the risk of electrical shock, turn Power Switch OFF and disconnect polarized plug from electrical outlet BEFORE performing maintenance or troubleshooting checks. www.BISSELL.com... -
Page 3: Table Of Contents
The device has been evaluated to meet general which the receiver is connected. » Consult the dealer or an experienced radio/TV technician for help. RF exposure requirement. The device can be used in portable exposure Package Contents BISSELL® Docking Power Adapter Remote Control Edge Cleaning... -
Page 4: Product View
2. Start, Stop, & Dock Button 8. Rear Wheels 3. Contact Points 9. Dust Bin Release Button (for automatic charging) 10. Dust Bin (filters inside) 4. Cliff Sensors 11. Brush Roll 5. Bumper 12. DC Port 6. Edge Cleaning Brushes 13. Removable Battery www.BISSELL.com... -
Page 5: Setup
Docking Station and then plug the other end into the wall outlet. Turn ON the unit’s Power Switch and put on the Docking Station. The first charge will take 4-5 hours. www.BISSELL.com... - Page 6 Remote Control display. robot to start cleaning. schedule has been saved. NOTE: To cancel a scheduled cleaning session, press and hold the schedule button on the remote. www.BISSELL.com...
-
Page 7: Operations
Press the Power Switch to the ON (I) position. of the robot to start cleaning. When finished, press the Start/Stop Press the Start/Stop Button twice to Button again to stop the robot. return the robot to the Docking Station. www.BISSELL.com... -
Page 8: Maintenance & Care
Bin with tap water. Ensure Dust Bin is Once clean, reinstall the filters and completely dry before re-installing. It is filter cover, close and push back not necessary to wash every time. into the unit. Do not machine wash the Dust Bin. www.BISSELL.com... - Page 9 To ensure the best efficiency, the sensors should be cleaned off periodically by brushing any debris from them. Before cleaning the sensors, ensure the Power Switch on the robot is in the OFF (0) position. www.BISSELL.com...
- Page 10 WARNING - DISPOSAL OF BATTERY If your robotic vacuum is to be disposed of, the battery should be removed and disposed of properly. For specific battery disposal instructions, please contact RBRC (Rechargeable Battery Recycling Corporation) 1-800-822-8837 or visit www.Call2Recycle.org. www.BISSELL.com...
- Page 11 NOTE: After being used for a period of time, the Edge Cleaning Brushes need to be cleaned to work more effectively. Once removed, the Edge Cleaning Brushes can be rinsed or soaked in water. Be sure they are completely dry before returning to the unit. www.BISSELL.com...
-
Page 12: Troubleshooting
Docking Robot is too far away from the Limit or control the range of the Station after Docking Station. robot by closing off rooms, or by cleaning using the manual cleaning arrows on the remote control. www.BISSELL.com... - Page 13 Brush Roll is stuck. Turn OFF the robot and remove hair and debris from Brush Roll. Solid Red Four beeps Bumper is stuck. Turn OFF the robot and tap the Bumper several times to release any debris that may have accumulated. www.BISSELL.com...
-
Page 14: Warranty
Please do not return this product to the store. Other maintenance or service not included in the manual should be performed by an authorized service representative. For any questions or concerns, BISSELL is happy to be of service. Contact us directly at 1-800-237-7691. www.BISSELL.com... - Page 15 Notes...
-
Page 16: Product Registration
NOTE: Please keep your original sales receipt. It provides proof of purchase date in the event of a warranty claim. See Warranty page for details. Parts & Supplies For Parts and Supplies, go to www.BISSELL.com and enter your model number in the search field. Love your product? BISSELL®...