Bissell PROheat 25A3 Series User Manual page 17

DirtLifter PowerBrush d oesnotturn
Possible cause
1. The brushbelt or pumpbelt is off or broken.
Cleaner not picking up solution
Possible cause
1. ReadyTools dial may be on the
wrong setting for the cleaningjob.
2. Poor t ool posilJon.
(Handheldattachments only).
3. Removable nozzlemay notbe properlyattached.
4. 2-in-1 tank lid is notproperlyinstalled.
5. 2-in-1 tank is not properlyseated.
6. 2-in-1 tank has picked up maximumdirty water.
7. The lint screenmay be clogged.
Remedies
1. Referto Remedy4 on page16 to check if
brushbelt or pump belt is broken.
Remedies
1. Set ReadyTools dial to either floor
cleaning or tools.
2. Adjustangle;applymore
downwardpressure.
3. Make sure nozzle is on correctly by
slightly raisingfront of machineto line up
slots on the base of the machinewith the
hookson nozzle.Attach at basefirst and
then click nozzle into place. Referto
image 5 on page 12.
4. Re-install l id; referto the imageson page10.
5. 2-in-1 tank mustbe firmlyseatedto function;
removeandreseat2-in-1 tank.
6. Empty2-in-1 tank and refill,referto the
Operation section.
7. Cleanout lint screen.Referto page12.
Other maintenance or service not included in the manual should be performed by an
authorized service representative.
Thankyou for selecting a BISSELL product.
] Pleasedonotreturnthis product to the store]
For anyqueslions orconcerns, BISSELL ishappy t obeofservice.
Conlact usdirectly at 1-800-237-7691.
www.bissell,com _ 800.237.7691
ug120-4078 25A3 908.indd 17 10/14/08 1:21:09 PM