Bissell PROheat 25A3 Series User Manual page 13

Ready Tools
TM
(continued)
5. Vacuum thoroughly t o pickup loose debrisand
pethair. U sea vacuum wi1_a brushattachment
anda crevice tooltodeaninfabricfoldsandtufts.
6. Tobegincleaning with attachments,follow
the instructionson pages 10-11 for filling
the 2-in-1 water tank and the formulatank.
7. Setthe ReadyTools dialto the TOOLS setldng.
Thiswill allowsprayandsuctionfromme hose.
8. Attachthe cleaning tool of yourchoiceto the
endof the hose.
9,
Clean bypressing 1_ebiggerto spraysolu'don
ontomeareato be cleaned. Slowlymovethe tool
backandfo_ overme soiled surface. R elease
metrigger to suddon dirtywater. C on'dnue toclean
inme area, w orkingin smallsections, un'dl dirt is
removed. C aution: Do Not nverwet.
10.
11.
Whenfinishedcleaning, removeand rinse
tool(s)in clean,runningwater.
It is recommendedthat you suctionclean
water from the tap to rinseout the hose.
12. Beforewrappinghoseonto tool rack, lift
endof hoseand stretch out to ensureall
water is clearedfrom hose.
13. Wrapflex hosearoundtool rack.
14. Empty2-in-1 water tank andrinse out,
following instructionson page 12.
15. If the ReadyTools d ial becomesdifficult to
turn, the diverterassemblythat holdsthe
dial may needto be cleaned. T oclean,first
removenozzleand locatescrew that holds
the diverterassemblyinplace.With a Phillips
screwdriver, r emovethe screw andset aside.
16.
17.
18.
Remove diverterassembly; h old under
runningwatermakingsurewaterflows
throughandaroundthe dial.Turnthe dialabout
10 times clockwiseand 10 moretimes counter
clockwise. T his shouldfreeup any debris.
Wipediverterassemblywith a soft cloth and
replaceback on machine.Replacenozzle.
ReturnReadyTools dial to FLOOR CLEANING
setting.
www.bissell,com
7,
11. 12.
Runwaterthrough here
16.
Screw
800,237.7691
ug120-4078 25A3 908.indd 13 10/14/08 1:21:08 PM