Advertisement
OPERATING THE APPLIANCE – (TIMER MODE)
1. Automatic Shut-off Function
Touch the "Timer" key and the display screen will flash and show "00:05" (minutes). To set the
-
desired shut-off time, press the timer key and select between the ranges of 00:05 minute to
24:00 hour. The timer can be adjusted at the interval of 5 minutes each time the key is pressed.
After setting the timer, the display screen will flash 3 times and start to count down by showing
the remaining time.
2. Automatic Start Function (Preset Timer)
Touch the "Timer" key and the display screen will flash and show "00:10" (minutes). To set the
-
desired preset time, press the timer key and select between the ranges of 00:10 minute to 24:00
hour. The timer can be adjusted at the interval of 10 minutes each time the key is pressed. After
that, touch the "Function" icon and select the desired function. After setting the timer and
function, the display screen will flash 3 times and start to count down by showing the remaining
time.
TROUBLESHOOTING GUIDE– (FAULTY CODE)
Screen Display
E1
E2
E3
Heat sensor open circuit or short circuit
No pot is detected
IC error
PCB error
Top plate overheated
Dry-boiled
Fault Detected
7
Advertisement
