Advertisement
OPERATING THE APPLIANCE
1. Place the health pot at the center of the base station. Warning: Please do not power on the
appliance with an empty pot as this will cause damage and deformation to the health pot. Power
on the appliance and you will hear a "beeping" sound. The display screen will show "----". The
display screen will show water temperature when the power is on without operating.
2. Touch the "ON/OFF" icon
cooking functions.
3. Touch the cooking function key, the display screen will show the default operating temperature
level. After setting the cooking function, the display screen will flash 3 times and start cooking.
4. The sequence of function menu is Water, Tea, Boiled Egg, Noodle, Soup, Porridge, Hot Pot,
Yogurt, Medicated Diet, Wine, Milk, Herbal Tea, Sterilize, Keep Warm, Steam Egg, Coffee, Fruit
Tea, and Milk Powder.
5. To cancel any of the selected cooking function, touch the "ON/OFF" icon.
6. During the cooking cycle, the power level can be changed by pressing the "ADJUST" icon. The
display screen will flash by showing the power level. After setting the power level, the display
screen will flash 3 times and then show the water temperature. The appliance will start to heat
up with power level newly set.
7. When the cooking cycle of the selected function is end, the buzzer will ring 3 times and the
display screen will show the current water temperature. The display will disappear after 1minute.
8. After the cooking has finished, power off and unplug the appliance.
OPERATING THE APPLIANCE – (FUNCTION MODE)
1. Water
Touch the "Function" icon and select "Water", the display screen will show the current water
temperature and heat up with full power to 100°C. After boiling, you will hear the "beeping"
sound. The base station will shut off automatically with "beeping" sound after another 1 minute
of heating.
2. Tea
Touch the "Function" icon and select "Tea", the display screen will show the current water
temperature and heat up with full power to 100°C. After boiling, the base station will
automatically turn to low power and continue to heat for 20 minutes before shutting off
automatically with "beeping" sound.
3. Boiled Egg
Touch the "Function" icon and select " Boiled Egg", the display screen will show the current
water temperature and heat up with full power to 100°C. After boiling, the base station will
automatically turn to half power and continue to heat for 10 minutes before shutting off
automatically with "beeping" sound.
(Note: Recommend to fill with enough water to cover up to half eggs in egg tray)
and then followed by the cooking function key to select desired
4
Advertisement
