Download
Share
Print this page
microSYST mipick MP Series User Manual
  1. Manuals
  2. Brands
  3. microSYST Manuals
  4. Monitor
  5. mipick MP Series
  6. User manual

microSYST mipick MP Series User Manual

Pick-to-light system
Hide thumbs

Advertisement

Quick Links

Download this manual
mipick MP
Pick-to-Light System
User Manual
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de

Advertisement

loading
Need help?

Need help?

Do you have a question about the mipick MP Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for microSYST mipick MP Series

Summary of Contents for microSYST mipick MP Series

  • Page 1 MP Pick-to-Light System User Manual microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 2 Display shaft mipick Bus termination ETHERNET Configuration of the Ethernet Interface Ethernet Communication 5.2.1 Sending commands 5.2.2 Receiving status messages Page 2 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 3 Bus participant message Control command mipick MP20 Control command mipick MP80 Additional commands DISPLAYABLE CHARACTERS DECLARATION OF CONFORMITY VERSION OVERVIEW Page 3 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 4 However, the limited space is an unsolvable task for many pick-to-light systems. But with the development of the “mipick MP”, microSYST has found a solution for exactly this problem. "mipick MP" stands for easy installation thanks to simplified wiring and a newly developed software-controlled programming.

  • Page 5: System Overview

    Distribution Unit RS485, 24 VDC Line 1 Line 2 Pick Display Pick Display Pick Display Pick Display Bus Termination Bus Termination Page 5 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 6 3.1.1 Distribution unit for Ethernet TCP/IP Power Supply Interface Circuit Breaker Ethernet/mipick 230 VAC mipick displays mipick displays Ethernet TCP/IP Line 2 Line 1 Page 6 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 7 No active TCP/IP connection FAULT Active TCP/IP connection Green No data traffic at the serial interface Blinking Data traffic at the serial interface Page 7 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 8 Bus termination is set no bus termination The bus termination must be set if the interface comes first in the RS485 bus. Page 8 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 9 Power supply Circuit Breaker Interface Profibus/mipick mipick displays mipick displays 230 VAC line 2 line 1 Profibus IN Profibus OUT Page 9 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 10 Controller is working green (RUN) short off Profibus DP toggle byte has been changed (flickering) (command or status message transmitted) Page 10 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 11 (C1, C2) on request only (C0, C1 or up and every restart of the DP communica- tion ■ ■ ■ ■ Page 11 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 12 30 mm Housing colour: natural with grey foil Mounting: snap-on mounting Protection: front panel IP40 Operating temperature: 0...+50°C Storage temperature: -25...+70°C Page 12 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 13 30 mm Housing colour: natural with grey foil Mounting: snap-on mounting Protection: front panel IP40 Operating temperature: 0...+50°C Storage temperature: -25...+70°C Page 13 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 14 PC via an USB/RS485 converter. • Please select the interface and press the button “Verbindung herstel- len/create connection” Page 14 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 15 Continue until all displays of the bus have been assigned. You can stop the programming with the button “Adressierung beenden” (= stop addressing). Page 15 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 17 Display Interface RS485 bus and power supply are provided for each display line. line 2 line 1 to the display shaft Page 17 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 18 4.4 Bus termination After the last display of the line the bus termination board will be connected: Page 18 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 19 ARP -S XXX.XXX.XXX.XXX xx-xx-xx-xx-xx-xx <CR> XXX.XXX.XXX.XXX : required IP address xx-xx-xx-xx-xx-xx : Ethernet MAC address of the interface (see label on the RJ45 socket) Page 19 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 20 The configuration of the Ethernet interface is now completed. The telegram for controlling can now be transmitted via the selected IP address (TCP/IP connection via port 10001). Page 20 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 21 Their structure is as follows: Address of the pick display Length of the data Data 1 byte 1 byte n bytes Page 21 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 22 04 08 80 20 20 31 32 00 00 00 (address = 4, length = 8 bytes, data = 80 20 20 31 32 00 00 00) Page 22 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 23 Important: With regard to above mentioned example only one status message is trans- ferred but should there be more than one status messages they will be transmitted at the same time. Page 23 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 24 The maximum number of input or output bytes is 200 bytes each, but the length of 300 bytes (input + output) may not be exceeded. Standard configuration: 0x3F, 16 input / output bytes. Page 24 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 25 Standard parameters configuration is necessary and is normally added by the used DP configurators. 6.1.4 Diagnostic data The interface does not support any extended diagnostic data. Default diagnosis is used. Page 25 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 26 The maximum I/O width may not be exceeded (please see chapter „configuration data“). Page 26 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 27 4. Wait for “QBK“: DP IN(hex) = 00 XX XX XX ... ▼ DP IN(hex) = 01 XX XX XX ... Page 27 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 28 (command confirmation) 3. Set “QBS” to the value of “TBS”: ▼ DP OUT(hex) = XX 01 XX XX XX ... Page 28 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 29 If the DIP switch S3-3 is set to ON every status message will be reported separately (in order to simplify the evaluation of the DP master). Page 29 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 30 If a status byte will be unequal 0 OR at least one additional “parameter byte” will be received an event occurs. It will then be transmitted from the interface to the control computer. Page 30 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 31 : Request a bus participant message C2 (if 128 addresses) : Request a bus participant messages C1 and C2 (if 128 addresses) Page 31 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 32 11 = 0.8 s Bit 5=0 do not report keystrokes +/- 5=1: report keystrokes +/- Bit 7, 6: reserved (=0) Page 32 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 33 Then, there will be no change between the two fields on the display. Page 33 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 34 Option 2 (byte 17): bit 0,1,4,5,6,7 Option 3 (byte 18): bit 5 Text and vaue (bytes 4-15) will be ignored Page 34 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 35 5=1: report keystrokes +/- Bit 6: reserved (=0) Bit 7=1 only evaluate options Command Confirmation: Address Length Command confirmation 0…127 Page 35 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 36 Bit 3 = 1: „-“ key is pressed Bit 4...7 : reserved (= 0) Starting the LED error checking: Address Length Command Start checking 0…127 Page 36 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 37 LED Matrix (47x7 LEDs, line-by-line from top left to the bottom right) 7.5 Additional commands Displaying addresses Data Address Length Command 0…127, 255 = Broadcast Page 37 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 38 Data Address Length Command Value 0…127 0…99 Querying software version Data Address Length Command 0…127, 255 = Broadcast Command confirmation: Page 38 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 39 Bit 2 = 1: „+“ key pressed 0…127 Bit 3 = 1: „-“ kex pressed Bit 4...7: reserved (= 0) Page 39 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...

  • Page 40: Displayable Characters

    Segment a* Space Segment b* Segment c* Segment d* Segment e* Segment f* Segment g* Punkt dp* *Assignment of segments Page 40 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...
  • Page 41 With regard to the pick display MP80 a large part of the ASCII character set (bytes 32 until 127) can be displayed (letters, numbers, special characters). Page 41 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...

  • Page 42: Eu-Konformitätserklärung

    Richtlinie 2014/35/EU +A2:2013 Low Voltage Directive RoHS Richtlinie 2011/65/EU EN50581:2012 RoHS Directive Windischeschenbach, 16.11.2016 Manuel Raß Geschäftsführer / General Manager Page 42 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...

  • Page 43: Version Overview

    Document created 1.10 03.05.16 Declaration of conformity 1.20 13.09.17 Display MP80 has been added Certified per DIN EN ISO 9001. Page 43 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach Tel. +49 9681 91960-0, Fax +49 9681 91960-10, www.microsyst.de, info@microsyst.de...

This manual is also suitable for:

Mipick mp80Mipick mp20