microSYST Migan MPB FI/SI Manual
  1. Manuals
  2. Brands
  3. microSYST Manuals
  4. Monitor
  5. Migan MPB FI/SI
  6. Manual

microSYST Migan MPB FI/SI Manual

Large displays numeric led with ethernet tcp/ip / profibus dp / profinet / serial interface
Hide thumbs
Table of Contents

Advertisement

Quick Links

migan MPB FI/SI
Large Displays Numeric LED with Ethernet TCP/IP / Profibus DP /
Profinet / Serial Interface
Manual
microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach
 +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Migan MPB FI/SI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for microSYST Migan MPB FI/SI

Summary of Contents for microSYST Migan MPB FI/SI

  • Page 1 MPB FI/SI Large Displays Numeric LED with Ethernet TCP/IP / Profibus DP / Profinet / Serial Interface Manual microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de...

  • Page 2: Table Of Contents

    Configuration of the Profinet Controller 3.4.2 Profinet Device: Assign Name 3.4.3 Interface Settings 3.4.4 Operation 3.4.5 Controlling Example CONTROL DATA Display Output Response Frame microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 2...
  • Page 3 Large Displays Numeric LED with Ethernet TCP/IP/ Profibus DP/ Profinet / Serial Interface APPENDIX Displayable Characters Protocol “Classic” (Previous Version) Maintenance and Care Declaration of Conformity Warranty / Liability Versions Overview microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 3...

  • Page 4: General

    For compatibility reasons, however, the “old” controlling can be activated by software (MKS). For details, refer to chapter “Protocol Classic”. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 4...

  • Page 5: Technical Information

    Operating temp.: Storage temp.: -25 ... +70 °C Details to the used interface can be found in the corresponding chapters. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 5...

  • Page 6: Device Configuration

    Ethernet TCP/IP Profibus DP 2x Profinet RS485 (integrated switch) RS232 Digital Inputs Digital Outputs Protocol (at delivery): Universal (standard) Classic microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 6...

  • Page 7: Pin Assignment Supply Power

    Basically, you need the protocols, which are described in chapter “Control Data“. Depending on the interface, there may be additional bytes. Please see respective chapter “Operation“ for details. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 7...

  • Page 8: Devices With Rs485 / 232

    Blinks at a frequency of approx. 0,5 Hz Software upload: Flickers during the upload Configuration: Defective MKS: Blinks with an Error Code: 1x microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 8...

  • Page 9: Pin Assignments Rs485 / 232

    GND * +5 VDC * Rx- / Tx- * If an external bus termination is needed, these pins can be used. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 9...

  • Page 10: Operation

    01 06 00 30 80 00 7B 55 \/ \/ \_________/ \/ \/ | LEN O1…O4 “123”| 2. Wait for response frame 01 02 00 55 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 10...

  • Page 11: Devices With Ethernet Tcp/Ip

    ARP -S XXX.XXX.XXX.XXX xx-xx-xx-xx-xx-xx < CR> XXX.XXX.XXX.XXX : desired IP address xx-xx-xx-xx-xx-xx : Ethernet MAC address of the device (see label at the housing) microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 11...
  • Page 12 Now, the control frame can be transmitted to the display via the selected IP address (TCP/IP connection via port 10001). microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 12...

  • Page 13: Operation

    01 06 00 30 80 00 7B 55 \/ \/ \_________/ \/ \/ | LEN O1…O4 “123”| 2. Wait for response frame 01 02 00 55 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 13...

  • Page 14: Recover Factory Settings

     Save settings with item "9" (Save and exit) and "Enter".  Close the window of the MS DOS entry prompt microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 14...

  • Page 15: Devices With Profibus Dp

    187.5 kBaud / 500 kBaud / 1.5 MBaud / 3 MBaud, 6 MBaud, 12 MBaud Protocol: Profibus DP DIN19245, part 3 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 15...

  • Page 16: Configuration

    The configured input data width must be at least 2 bytes larger than the longest used response frame (because of toggle and length byte). microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 16...
  • Page 17 Note: Standard parametrisation is required and is normally installed by the uti- lised DP configurators. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 17...

  • Page 18: Interface Settings

    The bus termination has to be set at the beginning and at the end of the Profibus line (either internally or externally). microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 18...

  • Page 19: Pin Assignment Profibus Dp

    3.3.3 Pin Assignment Profibus DP Assignment Rx+ / Tx+ (B strand) GND, electrically isolated 5V, electrically isolated Rx- / Tx- (A strand) microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 19...

  • Page 20: Operation

    3 through n, and the frame length is entered as byte 2 (= length byte). The length byte reflects the number of following bytes. The toggle byte is also increased by 1. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 20...

  • Page 21: Controlling Example

    Input: 01 04 01 02 00 55 00 00 00 00 00 00 00 00 00 00 \/ \/ \_________/ response frame | length toggle byte byte microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 21...

  • Page 22: Devices With Profinet

    - Output data width = 0…250 bytes - Input data width = 0…250 bytes - Vendor-/Device-ID = 01CF / 0001 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 22...

  • Page 23: Configuration Of The Profinet Controller

    - DAP3 (standard), if the MRP ability of the interface shall be activated. ”Drag“ the needed “DAP“ to your Profinet system: microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 23...
  • Page 24 Large Displays Numeric LED with Ethernet TCP/IP / Profibus DP / Profinet / Serial Interface Consider a meaningful name for the device and rename the interface (here “miface1”) accordingly: microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 24...
  • Page 25 8 ms to avoid unnecessary network load)! After finishing the Profinet configuration, it must still be loaded into the Profinet controller: „Station/Save and Compile“ „PLC/Download...“ microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 25...

  • Page 26: Profinet Device: Assign Name

    Tip: If you want to find the device of the marked line, you can click on „Flashing on“. LED 1 (green) of the corresponding interface starts to blink then. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 26...

  • Page 27: Interface Settings

    *1: The interface ist mounted to the migan controller board. *2: The interface is connected with the migan controller board via RS485. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 27...

  • Page 28: Operation

    PN device must have the matching name. The communication between Profinet controller and the display (Profinet device) happens within cyclic data traffic. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 28...
  • Page 29 As soon as it changes, data of the received frame can be read out and next frame can be sent. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 29...

  • Page 30: Controlling Example

    Input: 01 04 01 02 00 55 00 00 00 00 00 00 00 00 00 00 \/ \/ \_________/ response frame | length toggle byte byte microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 30...

  • Page 31: Control Data

    Bit 0 = Digital output 1 Output will be set, if corresponding bit = 1 * at communication with response frame microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 31...
  • Page 32 A point is set, if corresponding bit = 1 Depending on the display module (ordering option), only a decimal point or only a colon can be shown. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 32...
  • Page 33 01 0C 00 41 40 00 7B 00 41 40 00 37 02 55 \______________/\______________/ Line 1 Line 2 (O2...D2) (O2...D2) microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 33...

  • Page 34: Response Frame

    Status of a digital input = 1, if it’s set at the moment. Example Device address = 1, digital input 3 is set 01 02 04 55 microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 34...

  • Page 35: Appendix

    . / : * Depending on the display module (ordering option), only the decimal point or only the colon can be shown. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 35...

  • Page 36: Protocol "Classic" (Previous Version)

    (MKS). Devices with Profibus or Profinet interface need two more bytes; see corresponding chapters “Operation”. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 36...
  • Page 37 Device address 23, display “1.23“, decimal point as ASCII character via the data bytes 3C 32 33 40 40 40 31 2E 32 33 3E microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 37...
  • Page 38 Example Device address = 1, set digital output 2, brightness = 80 % 3C 30 31 62 61 60 3E microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 38...
  • Page 39 Device address = 1, digital input 4 was set at least once since last query 3C 30 31 40 48 40 3E microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 39...

  • Page 40: Maintenance And Care

    Do not attempt to repair the device yourself. The guarantee is rendered null and void if the device is tampered with by unauthorized persons. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 40...

  • Page 41: Eu Declaration Of Conformity

    EN60950-1:2006 +A11:2009 +A1:2010 +A12:2011 Low Voltage Directive +A2:2013 RoHS Richtlinie 2011/65/EU EN50581:2012 RoHS Directive Windischeschenbach, 16.11.2017 Manuel Raß Geschäftsführer / General Manager microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 41...

  • Page 42: Warranty / Liability

    “used” and that it has been purchased “as is”. No guarantee claims may be made in such cases. The General Terms and Conditions of microSYST Systemelectronic GmbH in current version apply as well. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach ...

  • Page 43: Versions Overview

    Change of address and title MPB 3.20 28.11.18 Change of titles, change page 33 and 34 Certified per DIN EN ISO 9001. microSYST Systemelectronic GmbH, Am Gewerbepark 11, 92670 Windischeschenbach  +49 9681 91960-0,  +49 9681 91960-10, info@microsyst.de, www.microsyst.de Page 43...

Table of Contents