Maintenance And Cleaning; Ordinary Maintenance - TEXA KONFORT 744 Technical Manual

13 MAINTENANCE AND CLEANING

This chapter describes the maitenance operations required for the device.
Any maintenance operation on the equipment must be carried out
only by personnel authorised by TEXA S.p.A.
Carefully follow the instructions provided in this manual.
Only use original spare parts or approved by TEXA S.p.A.
For more information contact the post-sales assistance service.

13.1 Ordinary Maintenance

Scheduled maintenance is made up of a series of operations that must be
carried out periodically.
Specific messages will appear on your display each time a maintenance
operation has expired and needs to be carried out.
Maintenance operation
Vacuum pump oil replacement When prompted by the device.
Printer Paper Replacement
The maintenance operations that require you to remove parts of the
equipment must be carried out with the charging station switched
off.
In order to carry out the charging station maintenance operations described
above, you must remove the front shield.
Proceed as follows:
1. Turn off the equipment.
2. Go behind the device.
3. Block the rear wheels.
4. Using a n° 3 hexagonal wrench remove the four screws that fasten the front cover
to the body of the machine.
5. Stand in front of the recharging station.
6. Using a n° 3 hexagonal wrench loosen the two screws that fasten the front cover
to the top cover.
7. Lift the top cover slightly.
8. Remove the front cover.
44
Frequency
each time the paper runs out.