Table of Contents
Advertisement
2. Place the paper roll into the specific compartment.
3. Close the compartment pressing lightly on the cover and leaving a slip of paper
sticking out.
4.
Press
to make sure the paper has been inserted correctly.
5. Repeat the operations indicated above if the paper does not come out.
8.8 How to Fill the Bottles
You must fill the oil and UV tracer bottles before use.
Fill the bottle with the correct type of oil.
That bottles that are provided with the equipment are delivered empty and must
be filled properly.
Proceed as follows:
1. Remove the bottle by pulling the
unlocking handle.
2. Screw the tank cap off.
3. Fill the bottle with the oil/UV tracer.
4. Screw the tank cap on.
5. Reinsert the bottle.
The status LED indicates if the related bottle was inserted correctly:
• GREEN: bottle inserted correctly
• RED: bottle removed or not correctly inserted.
8.9 Language Setup
The software within the device can be viewed in different languages.
The languages available are stored within the SD CARD.
Italian is the default language.
34
Hide quick links:
Advertisement
Table of Contents
