Installation; Unwrapping The Device - TEXA KONFORT 744 Technical Manual

7 INSTALLATION

This chapter describes the procedures required in order to install the device
properly.
The installation must be performed by qualified personnel only,
carefully following the instructions provided in this manual.
The device is provided with the following:
• Technical Manual: contains the description of the device, user instructions to
guarantee a correct use and correct maintenance.
• CD Documentation: contains the technical and operating manual (user
instructions for the device)
• SD CARD
• SD CARD READER
• Protective cover for the device

7.1 Unwrapping the Device

This chapter describes the instructions for unwrapping/unpacking the device.
Perform the described operations with extreme care and on a flat
surface in order to avoid the device from tipping over.
Proceed as follows:
1. Remove the cardboard.
2. Remove the bands that fasten the device to the
pallet.
3. Remove the device from the pallet.
4. Unlock the wheels.
5. Make sure the device is in good condition and that it
has not been tampered with and/or damaged.
6. Make sure no parts are missing.
en
25